Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: [EFM] OAM developing Geoff's observation.




Faye,

I am saying that EFM SPs must be equally involved and have
a say in this that would bring about an OAM mechanism that would make
sense for them to deploy it. Since, access is very cost sensitive
and lots of disparate technologies have been developed, deployed
and seems still there is not a good solution. 

Now, ethernet is coming to play in this arena with its simplicity and cost
effectiveness ($/mbit) argument. But Ethernet does not have OAM functionality
as is in the SONET/SDH networks. Since SPs do know how the OAM
works it would be prudent to incorporate OAM in Etherent in most effiecient
way that make sense to deploy it. 

Think about Ethernet everywhere! If OAM is develpoed that would work
in access and metro etherenet seemelssly, wouldn't it make sense?
Just as an example, if EFM develops SONET like channel, then I guess
you could run any protocol over that channel as convenient (PPP, HDLC...),
if wanted. 
  
Thanks,
Sanjeev

At 10:36 AM 09/17/2001 -0700, Faye Ly wrote:
>Sanjeev,
>
>Are you saying that we need the requirements from the carriers first
>before
>deciding on a (or multiple) mechanisms for transporting OAM&P traffic?
>
>-faye
>
>-----Original Message-----
>From: Sanjeev Mahalawat [mailto:sanjeev@cisco.com]
>Sent: Saturday, September 15, 2001 11:41 AM
>To: bob.barrett@fourthtrack.com; Geoff Thompson; fkittred@gwi.net
>Cc: stds-802-3-efm@ieee.org
>Subject: RE: [EFM] OAM developing Geoff's observation.
>
>
>
>Hi Bob,
>
>I think following issues for OAM in EFM to decide in-band or side-band
>OAM support.
>
>1. What needs to be done for OAM in 802.3ah? Influences in-band or
>side-band decision?
>
>2. How OAM is done?
>Since, 802.3ah has extension EFM (etherenet in first mile), with that
>there seems to be two choices:
>   a) Both layer 1 and layer 2 are Ethernet, or
>   b) layer 1 does not have to be Ethernet, but layer 2 is Ethernet.
>
>In case a) there are further couple of choices:
>i)  All the existing Ethernet PHYs and any new 802.3 PHY MUST be
>supported.
>ii) A new EFM phy will be developed and MUST be supported, and support
>for any 
>    802.3 Ethernet PHY is optional.
>
>If only a) and ii) are the objectives then either in-band or side-band
>can achieve the 
>objective with side-band (preamble/ipg) being more beneficial. If b) and
>i) are objectives
>then I am not sure there are many choices other than in-band.
>
>Now, if EFM Service Providers want side-band (preamble/ipg or any other
>added SONET/SDH like) 
>solution (and hence a requirement) then objectives can be accordingly,
>i.e. a) and ii) from above. 
>
>But, if the method is not specified and left to open then I guess
>everybody is open to non-interoperability.
>
>Thanks,
>Sanjeev Mahalawat 
>
>
>At 01:36 PM 09/15/2001 +0100, Bob Barrett wrote:
>>
>>I'm late in on this thread, so there may be a similar comment further
>up my
>>in-box from somebody else.
>>
>>Geoff's observation is pretty fundamental:
>>
>>> My expectation is that the demarcation device will probably end
>>> up with an IP address in order to support:
>>>          SNMP for OA&M
>>>          Firewall services for the subscriber
>>>
>>> (That issue is, of course, beyond our scope)
>>
>>The logical conclusion of this observation is that EFM should make the
>OAM
>>at layer two as simplistic as possible fulfilling only the basic
>>requirements i.e. limited number of managed objects and limited echo
>(L2
>>ping) test. Vendors can then leverage ietf standards (note: the users
>tends
>>to like these) to implement ietf style 'standard' management functions.
>>Isn't that what we all have in mind anyway :-).
>>
>>The open question then is will the service provider market accept
>in-band
>>management i.e. management IP frames mixed with user traffic, or is
>there a
>>real requirement for a side-band channel. If EFM does need to include a
>side
>>band channel then all that it needs to be is a communications channel
>(bit
>>stream), probably squeezed in the preamble or the IPG (we can debate
>that
>>choice for a while). Vendors can then implement either a standards
>based
>>method of comms over that channel or do there own thing. Personally I
>would
>>expect vendors to choose something like IP over PPP for this.
>>
>>I can wrap this all up in a presentation for the next meeting if
>required.
>>
>>(Just seen Geoff's comment on this in response to Roy's thread; as a
>vendor
>>we will probably want to support both in-band and side-band,
>standardised or
>>not, but we would prefer a standard for side band as part of EFM).
>>
>>Bob Barrett
>>
>>> -----Original Message-----
>>> From: owner-stds-802-3-efm@majordomo.ieee.org
>>> [mailto:owner-stds-802-3-efm@majordomo.ieee.org]On Behalf Of Geoff
>>> Thompson
>>> Sent: 04 September 2001 23:03
>>> To: fkittred@gwi.net
>>> Cc: stds-802-3-efm@ieee.org
>>> Subject: Re: [EFM] OAM loop back / echo server function
>>>
>>>
>>>
>>> Fletcher-
>>>
>>> I don't think this is a stupid question.
>>> I don't think we need an IP level PING
>>> A L2 ping would do, perhaps even better, the demarc would look for
>PING
>>> type and then just swap SA & DA.
>>> My expectation is that the demarcation device will need a MAC address
>>> My expectation is that the demarcation device will probably end
>>> up with an
>>> IP address in order to support:
>>>          SNMP for OA&M
>>>          Firewall services for the subscriber
>>>
>>> (That issue is, of course, beyond our scope)
>>>
>>> Geoff
>>>
>>> At 03:47 PM 9/4/01 -0400, Fletcher E Kittredge wrote:
>>> >On Fri, 31 Aug 2001 14:11:54 -0700  "Geoff Thompson" wrote:
>>> > > As I have said before, I do believe that we will need a
>>> demarcation device
>>> > > that has the capability to host OA&M functions.
>>> > > We have talked about "loop back" from this point in the network.
>>> > > Let us forevermore make that "PING"
>>> >
>>> >Geoff;
>>> >
>>> >         Apologies if this is a stupid question, but does PING in
>this
>>> >context mean the utility that sends an IP ICMP ECHO REQUEST packet
>and
>>> >listens for an ECHO REPLY packet?  If so, am I correct in thinking
>this
>>> >means the demarcation device would require an IP address?
>>> >
>>> >thanks!
>>> >fletcher
>>>
>> 
>