Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: [EFM] reflector usage




Howard,

Thank you. Thank you. Thank you.

jonathan

p.s. Clearly it remains the responsibility of all participants to decide which reflector is best for any particular thread.

| -----Original Message-----
| From: Howard Frazier [mailto:millardo@dominetsystems.com]
| Sent: Tuesday, August 13, 2002 8:45 PM
| To: stds-802-3-efm@ieee.org
| Subject: [EFM] reflector usage
| 
| 
| 
| 
| Dear Members of the IEEE 802.3ah EFM Task Force,
| 
| as you know, we have multiple email reflectors available
| for our use.  We have the stds-802-3-efm@ieee.org
| reflector, which is used for announcements and discussions
| of general interest.
| 
| We also have reflectors for each of our sub task forces,
| such as the stds-802-3-efm-p2p@ieee.org reflector
| and the stds-802-3-efm-p2mp@ieee.org reflector for
| the optical PMD and point to multipoint protocol sub
| task forces, respectively.
| 
| Some task force members find it annoying to receive
| multiple copies of email messages.  This is often caused
| by the unnecessary inclusion of multiple email reflector
| addresses on the distribution list.  As an example, there
| is no need to send a message to both stds-802-3-efm@ieee.org,
| and ANY of the sub task force reflectors, since 99% of the
| folks on a sub task force reflector are also on the primary
| task force reflector.  Please try to limit the distribution of
| messages to the extent possible.  Many of us are inundated
| with email messages, and even the simple chore of deleting
| a bunch of duplicate messages wastes time unnecessarily.
| 
| Thanks for your cooperation.
| 
| Howard Frazier
| Chair, IEEE 802.3ah EFM Task Force
| 
|