RE: [EFM] RE: Pause frame usage in transport networks
Ben,
> -----Original Message-----
> From: Ben Brown [mailto:bbrown@amcc.com]
> Sent: Friday, February 21, 2003 10:27 AM
> To: Shahram Davari
> Cc: 'Siamack Ayandeh'; Roy Bynum; Geoff Thompson; mattsquire@acm.org;
> Chau Chak; stds-802-3-efm@ieee.org
> Subject: Re: [EFM] RE: Pause frame usage in transport networks
>
>
>
> Shahram,
>
> OAM is a link specific protocol.
> If a customer wants to check
> connectivity within his private network and there are multiple
> links with switches between his end stations, he would not use
> OAM.
But if a customer is buying a leased-line or private-line service (like EOS),
he expects the service behave like a single link for him. So he should
be able to run 802.3ah OAM between its sites. Note that I am not talking
about switched services, I am talking about pure point-to-point services.
This same thing would apply to an access/transport network
> that has multiple links. You have to use a higher layer protocol,
> something that is not link specific.
Agree.
Yours,
-Shahram
>
> Regards,
> Ben
>
> Shahram Davari wrote:
> >
> > Hi Siamak,
> >
> > What should a customer do if he wants to check the
> connectivity between his sites?
> > You need to be able to pass OAM frames through the core.
> >
> > -Shahram
> >
> > > -----Original Message-----
> > > From: Siamack Ayandeh [mailto:sayandeh@txc.com]
> > > Sent: Thursday, February 20, 2003 10:30 PM
> > > To: Shahram Davari
> > > Cc: Roy Bynum; Ben Brown; Geoff Thompson; mattsquire@acm.org;
> > > Chau Chak;
> > > stds-802-3-efm@ieee.org
> > > Subject: Re: [EFM] RE: Pause frame usage in transport networks
> > >
> > >
> > > Sharam, So its settled then.
> > >
> > > Siamack
> > > P.S. you never mentioned what OAM function needs to be sent
> > > beyond OLT. Why
> > > for example the far side may be interested in BER of the
> near side?
> > >
> > > Shahram Davari wrote:
> > >
> > > > Siamak and all,
> > > >
> > > > I was just talking to a major carrier and in their initial
> > > deployment
> > > > of EOS they are relying on customer shaping/rate limiting.
> > > They don't send
> > > > any PAUSE at all.
> > > >
> > > > Yours,
> > > > Shahram
> > > >
> > > > > -----Original Message-----
> > > > > From: Shahram Davari
> > > > > Sent: Thursday, February 20, 2003 2:21 PM
> > > > > To: 'Siamack Ayandeh'; Roy Bynum
> > > > > Cc: Ben Brown; Geoff Thompson; mattsquire@acm.org; Chau Chak;
> > > > > stds-802-3-efm@ieee.org
> > > > > Subject: [EFM] RE: Pause frame usage in transport networks
> > > > >
> > > > >
> > > > >
> > > > > Siamak and all,
> > > > >
> > > > > Thanks for starting discussion on my original question.
> > > > > But my original question was more related to 802.3ah OAM.
> > > > > Do you think that the OLT should terminate 802.3ah OAM
> > > > > frames received from ONU?
> > > > >
> > > > > Please see some comments in-line.
> > > > >
> > > > > Yours,
> > > > > -Shahram
> > > > >
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Siamack Ayandeh [mailto:sayandeh@txc.com]
> > > > > > Sent: Thursday, February 20, 2003 10:49 AM
> > > > > > To: Roy Bynum
> > > > > > Cc: Ben Brown; Geoff Thompson; mattsquire@acm.org; Shahram
> > > > > > Davari; Chau
> > > > > > Chak; stds-802-3-efm@ieee.org
> > > > > > Subject: Re: Pause frame usage in transport networks
> > > > > >
> > > > > >
> > > > > > Roy,
> > > > > >
> > > > > > I suggest that we shy away from generalizations that arise
> > > > > > from a broad brush
> > > > > > discussion. I made very specific comments on the
> mailing list
> > > > > > and would be happy to
> > > > > > discuss specifics. Here is a brief summary (Please
> note that
> > > > > > discussion was
> > > > > > focused on EoS for Ethernet Private Line type services. So
> > > > > > both ends of the service
> > > > > > would have the same traffic parameters. More
> involved service
> > > > > > definitions were not
> > > > > > part of this discussion):
> > > > > >
> > > > > > 1. Network to subscriber Pause has advantages over
> shaping at
> > > > > > subscriber
> > > > >
> > > > > I wouldn't call it advantage. I think both are
> > > acceptable. In one case
> > > > > the ONU drops packet while in other case the OLT.
> > > > >
> > > > >
> > > > > > 2. Subscriber to network Pause is UNlikely to be invoked as
> > > > > > most often the backbone
> > > > > > link is the bottleneck. However if it does network would
> > > > > > buffer and subsequently
> > > > > > drop packets.
> > > > >
> > > > >
> > > > > Agree. The link BW is usually more than the SONET VC. Besides
> > > > > OLT can't
> > > > > back pressure the SONET.
> > > > >
> > > > > >Sending Pause to the far end is not practical
> > > > > > as it would require
> > > > > > large buffers to absorb the wide area round trip delays.
> > > > >
> > > > > We have heard some customers requiring this functionality. The
> > > > > problem is, how can we have both ONU-OLT pause and
> ONU-ONU pause?
> > > > >
> > > > > > 3. Pause would not interfere with OAM, if anything it avoids
> > > > > > loss of OAM frames and
> > > > > > the resulting time outs.
> > > > >
> > > > > Actually if you read 802.3ah section 55.1.6.3 it says that
> > > > > PAUSE frames
> > > > > may delay/prevent signaling of critical events. I think the
> > > > > reason is that
> > > > > PAUSE frames are treated the same as user MAC frames.
> > > > >
> > > > > >
> > > > > > Regards, Siamack
> > > > > >
> > > > > > Roy Bynum wrote:
> > > > > >
> > > > > > > Ben, Siamack,
> > > > > > >
> > > > > > > In these comments I am seeing the movement toward an link
> > > > > > facility that can
> > > > > > > be labeled as "Ethernet", but has little or none of
> > > the inherent
> > > > > > > characteristics of reliability and low latency variance.
> > > > > > Any Ethernet
> > > > > > > service that claims to be full duplex, but drops frames
> > > > > > without generating
> > > > > > > a "collision" when congested will fail meet the basic
> > > reliability
> > > > > > > characteristic of any 802.3 standard that I am aware of.
> > > > > > This is NOT Ethernet.
> > > > > > >
> > > > > > > The ONU should be allowed to "pause" the GFP/OLT
> on any one
> > > > > > link, and the
> > > > > > > GFP/OLT, should be allowed to "pause" the ONU on any one
> > > > > > link. With proper
> > > > > > > configuration of the operands, an ONU at one end of an end
> > > > > > to end "link"
> > > > > > > should be able to "pause" the ONU at the other end.
> > > Without that
> > > > > > > capability, what is being defined is no more reliable that
> > > > > > what exists
> > > > > > > today, and is some respects is less reliable than the
> > > alternative.
> > > > > > >
> > > > > > > When an end to end link starts "dropping" frames, the data
> > > > > > packets get
> > > > > > > retransmitted in new frames which now adds to the
> > > > > > congestion of a link and
> > > > > > > thus lowers the effective access bandwidth that can be
> > > > > > utilized. This has
> > > > > > > the effect of lowering the effective committed
> > > > > information rate even
> > > > > > > more. This is one of the primary reasons that experienced
> > > > > > WAN networking
> > > > > > > architects design IP networks to run as a nominal 30%
> > > > > > utilization. (I
> > > > > > > remember reading something by David Boggs about ~30%
> > > > > > utilization being the
> > > > > > > effective performance ceiling of congestion domain
> > > > > > networks. I turns out
> > > > > > > that he knew what he was talking about.)
> > > > > > >
> > > > > > > The current defined X.86/OLT does make use of "pause"
> > > > > > functionality, and
> > > > > > > will allow an ONU at one end of an end to end link "pause"
> > > > > > the ONU at the
> > > > > > > other end. By properly use of active flow control,
> > > the service
> > > > > > > communications link can perform as a non-congestion domain
> > > > > > link. With
> > > > > > > properly configured operands at the ONUs, this would be
> > > > > > highly reliable at
> > > > > > > the cost of lower predetermined bandwidth
> > > utilization, but without
> > > > > > > retransmissions. In experiments performed in the
> 1998-2000
> > > > > > time frame,
> > > > > > > effective utilization was found to be a direct ratio of
> > > > > > link/circuit speed
> > > > > > > to distance (I am having to write this from memory because
> > > > > > I no longer have
> > > > > > > access to the data.) Properly configured use of active
> > > > > > flow control can
> > > > > > > allow architecture designs with much higher effective
> > > > > > bandwidth utilization
> > > > > > > than 30%.
> > > > > > >
> > > > > > > Thank you,
> > > > > > > Roy Bynum
> > > > > > >
> > > > > > > At 10:15 PM 2/18/2003 -0500, Siamack Ayandeh wrote:
> > > > > > > >Ben,
> > > > > > > >
> > > > > > > >Please see my comments interleaved.
> > > > > > > >
> > > > > > > >Regards, Siamack
> > > > > > > >
> > > > > > > >Ben Brown wrote:
> > > > > > > >
> > > > > > > > > Siamack,
> > > > > > > > >
> > > > > > > > > This comment is way off track of the original
> > > question but I
> > > > > > > > > feel a need to ask this question. That's why
> I changed the
> > > > > > > > > subject. I'll even redraw the network so that
> > > we're all using
> > > > > > > > > the same context.
> > > > > > > > >
> > > > > > > > > ONU1 ------ OLT1/GFP ------------------- GFP/OLT2
> > > ------ ONU2
> > > > > > > > > Ethernet SONET
> Ethernet
> > > > > > > > >
> > > > > > > > > Why are Pause frames used on the Ethernet links? The
> > > > > ONU should
> > > > > > > > > never be allowed to Pause the OLT as that would
> > > back-pressure
> > > > > > > > > the entire WAN. Since the WAN doesn't support
> > > back-pressure,
> > > > > > > > > packets over the SONET link that exceed the OLT's
> > > > > egress buffers
> > > > > > > > > would wind up being dropped at the OLT.
> > > > > > > >
> > > > > > > >That's basically what I said "OLT can simply buffer and
> > > > > > subsequently drop
> > > > > > > >packets."
> > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > The OLT could Pause the ONU but for what reason? The
> > > > > only reason
> > > > > > > > > that I can think of would be to enforce the ONU's
> > > > > SLA. The point
> > > > > > > > > of putting an SLA in place is to enforce some set
> > > of rules,
> > > > > > > > > usually having to do with the minimum and maximum
> > > throughput
> > > > > > > > > guaranteed at the OLT for the ONU. The reason an
> > > SLA needs to
> > > > > > > > > be in place is because each side doesn't
> really trust the
> > > > > > > > > other's "handshake" and a legal document of sorts
> > > is needed.
> > > > > > > > > So, if neither side "trusts" the other, why
> do you rely on
> > > > > > > > > Pause frames to enforce the SLA? If the ONU will
> > > attempt to
> > > > > > > > > use as much bandwidth as possible, it will
> likely do so by
> > > > > > > > > ignoring the Pause frames from the OLT. This
> > > means that the
> > > > > > > > > only way the OLT can truly enforce the SLA is to
> > > be able to
> > > > > > > > > discard the frames that exceed the bandwidth
> agreed to in
> > > > > > > > > the SLA. If the OLT is capable of this, why even
> > > bother with
> > > > > > > > > Pause frames?
> > > > > > > >
> > > > > > > >You forget two things:
> > > > > > > >1. The bursty nature of traffic and the fact that peak is
> > > > > > greater than the
> > > > > > > >committed
> > > > > > > >rate of service
> > > > > > > >2. That networks by definition protect
> themselves i.e. can
> > > > > > not rely on
> > > > > > > >subscriber
> > > > > > > >alone
> > > > > > > >
> > > > > > > >If the subscriber exceeds its SLA then yes, frames would
> > > > > > be dropped. But
> > > > > > > >if it's just
> > > > > > > >a burst, i.e. on average the subscriber is in compliance
> > > > > > then buffering
> > > > > > > >and Pause
> > > > > > > >should do the job.
> > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Sorry for being long winded but I'm trying to
> > > make a logical
> > > > > > > > > argument. What assumptions did I make that
> aren't valid?
> > > > > > > > >
> > > > > > > > > Thanks,
> > > > > > > > > Ben
> > > > > > > > >
> > > > > > > > > Siamack Ayandeh wrote:
> > > > > > > > > >
> > > > > > > > > > Shahram,
> > > > > > > > > >
> > > > > > > > > > It would be helpful to this discussion if you
> > > > > > indicate what you had
> > > > > > > > in mind
> > > > > > > > > > with regard to OAM frames so one can think of a
> > > pragmatic
> > > > > > > > answer. For example
> > > > > > > > > > if you are worried about Pause frames: In this case
> > > > > > the SONET/SDH
> > > > > > > > (OLT1-OLT2)
> > > > > > > > > > is often the bottleneck link. So Pause is
> used on the
> > > > > > local link to
> > > > > > > > protect the
> > > > > > > > > > OLT-1/2 buffers. If the egress ONU back
> pressures the
> > > > > > network, then
> > > > > > > > OLT can
> > > > > > > > > > simply buffer and subsequently drop packets.
> > > > > > Otherwise fairly large
> > > > > > > > buffers
> > > > > > > > > > would be required to absorb the round trip time of
> > > > > > the wide area. If
> > > > > > > > you think
> > > > > > > > > > about it as a two port bridge, again Pause is not
> > > > > > propagated over the
> > > > > > > > wide
> > > > > > > > > > area. If you look at various IETF
> Pseudowire flavors,
> > > > > > again following
> > > > > > > > the lead
> > > > > > > > > > of IEEE, Pause is not propagated over the wide area.
> > > > > > > > > >
> > > > > > > > > > Siamack
> > > > > > > > > >
> > > > > > > > > > Geoff Thompson wrote:
> > > > > > > > > >
> > > > > > > > > > > Matt-
> > > > > > > > > > >
> > > > > > > > > > > To further enrich the information that
> you provided
> > > > > > below....
> > > > > > > > > > >
> > > > > > > > > > > 802.3 has a long, well established
> tradition of not
> > > > > > supporting media
> > > > > > > > > > > converters.
> > > > > > > > > > >
> > > > > > > > > > > It would be my opinion that any
> "features" designed
> > > > > > to specifically
> > > > > > > > support
> > > > > > > > > > > media converters were out of scope unless
> they were
> > > > > > specifically
> > > > > > > > mentioned
> > > > > > > > > > > in the PAR.
> > > > > > > > > > >
> > > > > > > > > > > Geoff
> > > > > > > > > > >
> > > > > > > > > > > At 01:05 AM 2/12/2003 -0500, Matt Squire wrote:
> > > > > > > > > > >
> > > > > > > > > > > >My 2 cents.
> > > > > > > > > > > >
> > > > > > > > > > > >If there is a MAC layer in the ONU, then OAM
> > > > > > terminates there. If a
> > > > > > > > > > > >vendor builds something without a MAC layer, then
> > > > > > it doesn't terminate
> > > > > > > > > > > >there. If you put MACs in your ONU,
> you're really
> > > > > > building something
> > > > > > > > > > > >akin to a 2-port bridge (likely with STP disabled
> > > > > > > > permanently). If you
> > > > > > > > > > > >don't, then its more along the lines of a media
> > > > > > converter. Both
> > > > > > > > models
> > > > > > > > > > > >can work. Both models can interoperate.
> So do it
> > > > > > anyway you
> > > > > > > > want, and
> > > > > > > > > > > >maybe the market will agree with you.
> > > > > > > > > > > >
> > > > > > > > > > > >- Matt
> > > > > > > > > > > >
> > > > > > > > > > > >Shahram Davari wrote:
> > > > > > > > > > > > >
> > > > > > > > > > > > > Roy,
> > > > > > > > > > > > >
> > > > > > > > > > > > > Since EOS is a private line service, It seems
> > > > > > that you agree
> > > > > > > > with me
> > > > > > > > > > > > and Chak that for the EOS it seems from
> > > > > > architectural point of
> > > > > > > > view the
> > > > > > > > > > > > OAM MAC frames should not be terminated at OLTs.
> > > > > > Is that correct?
> > > > > > > > > > > > >
> > > > > > > > > > > > > Yours,
> > > > > > > > > > > > > -Shahram
> > > > > > > > > > > > >
> > > > > > > > > > > > > > -----Original Message-----
> > > > > > > > > > > > > > From: Roy Bynum
> [mailto:rabynum@mindspring.com]
> > > > > > > > > > > > > > Sent: Tuesday, February 11, 2003 12:26 PM
> > > > > > > > > > > > > > To: Chau, Chak; stds-802-3-efm@ieee.org
> > > > > > > > > > > > > > Subject: RE: [EFM] Question regarding OAM in
> > > > > > 802.3ah D1.3
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Chak,
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Depending on the service definition and who
> > > > > > owns the service
> > > > > > > > > > > > > > facilities,
> > > > > > > > > > > > > > end to end OAM functionality would not
> > > necessarily
> > > > > > > > available. In all
> > > > > > > > > > > > > > packet services, the service provider would
> > > > > > own at least a
> > > > > > > > > > > > > > portion, if not
> > > > > > > > > > > > > > all of the communications facilities. The
> > > > > > OAM functionality
> > > > > > > > > > > > > > would then be
> > > > > > > > > > > > > > for the use of the service provider, not the
> > > > > > customer. Only
> > > > > > > > > > > > > > with a Leased
> > > > > > > > > > > > > > Circuit type of service (also referred to as
> > > > > > "Private Line")
> > > > > > > > > > > > > > would end to
> > > > > > > > > > > > > > end, OLT1 to OLT2 OAM functionality exist.
> > > > > > For all other
> > > > > > > > types of
> > > > > > > > > > > > > > services, the OAM for Link 1 would
> not be the
> > > > > > OAM for Link 2.
> > > > > > > > > > > > > > Other than
> > > > > > > > > > > > > > with a Leased Circuit service, the services
> > > > > > are defined to
> > > > > > > > > > > > > > alter, filter,
> > > > > > > > > > > > > > or drop customer originated
> frames/packets in
> > > > > > one way or
> > > > > > > > > > > > > > another, including
> > > > > > > > > > > > > > the OAM frames. This is the gist
> of the work
> > > > > > that is being
> > > > > > > > done by
> > > > > > > > > > > > > > SG15/Q.10 under E.Ethna. Other than with a
> > > > > > Leased Circuit
> > > > > > > > > > > > > > service, true
> > > > > > > > > > > > > > "transparency" does not exist.
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > Thank you,
> > > > > > > > > > > > > > Roy Bynum
> > > > > > > > > > > > > >
> > > > > > > > > > > > > > At 10:15 AM 2/11/2003 -0600, Chau,
> Chak wrote:
> > > > > > > > > > > > > > >Hi David and All,
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >I though for a PtP application the OAMPDUs
> > > > > > message should be
> > > > > > > > > > > > > > transparent
> > > > > > > > > > > > > > >form OLT1 to OLT2.
> > > > > > > > > > > > > > >Or else, this will defeat the purpose of
> > > > > > PtP, i.e., no L2 frame
> > > > > > > > > > > > > > >processing. Which means that OAM for Link1
> > > > > > can be OAM for
> > > > > > > > > > > > > > Link2, is that
> > > > > > > > > > > > > > >correct? This topic may be
> reviewed outside
> > > > > > of EFM if prefered.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >Kind Regards,
> > > > > > > > > > > > > > >Chak
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >Chak Chau
> > > > > > > > > > > > > > >FUJITSU, Transmission Development
> > > > > > > > > > > > > > >Phone: (972) 479-2795
> > > > > > > > > > > > > > >chak.chau@fnc.fujitsu.com
> > > > > > > > > > > > > > >chakavuth.chau@ties.itu.int
> > > > > > > > > > > > > > >-----Original Message-----
> > > > > > > > > > > > > > >From: David Martin
> > > > > > [mailto:dwmartin@nortelnetworks.com]
> > > > > > > > > > > > > > >Sent: Monday, February 10, 2003 2:59 PM
> > > > > > > > > > > > > > >To: stds-802-3-efm@ieee.org
> > > > > > > > > > > > > > >Subject: RE: [EFM] Question
> regarding OAM in
> > > > > > 802.3ah D1.3
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >Shahram,
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >Agreed, the EoS (e.g. GFP-F) mapping
> > > is a simple
> > > > > > > > > > > > > > port-to-port mapping and
> > > > > > > > > > > > > > >doesn't include the full MAC sublayer
> > > > > > processing (i.e. only
> > > > > > > > > > > > > > terminates
> > > > > > > > > > > > > > >IPG, preamble, SFD). Inspecting the MAC DA
> > > > > > and filtering off
> > > > > > > > > > > > > > EFM OAMPDUs
> > > > > > > > > > > > > > >and processing them is required by the
> > > > > > network application,
> > > > > > > > > > > > > > since the
> > > > > > > > > > > > > > >Ethernet link / PHY to which they apply is
> > > > > > terminated. OAM
> > > > > > > > > > > > > > for link 1
> > > > > > > > > > > > > > >cannot be mixed with OAM for link 2 on the
> > > > > > other side of the
> > > > > > > > > > > > > > provider's
> > > > > > > > > > > > > > >network.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >ONU1 --------------
> > > > > > OLT1/GFP------------------ GFP/OLT2
> > > > > > > > > > > > > > ------------ ONU2
> > > > > > > > > > > > > > > Ethernet
> SONET
> > > > > > > > > > > > > > Ethernet
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >It might be more appropriate to continue
> > > > > > this privately, or
> > > > > > > > > > > > > > on the Q.12/15
> > > > > > > > > > > > > > >reflector.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >...Dave
> > > > > > > > > > > > > > >David W. Martin
> > > > > > > > > > > > > > >Nortel Networks
> > > > > > > > > > > > > > ><mailto:dwmartin@ieee.org>dwmartin@ieee.org
> > > > > > > > > > > > > > >+1 613 765-2901 (esn 395)
> > > > > > > > > > > > > > >~~~~~~~~~~~~~~~~~~~~
> > > > > > > > > > > > > > >-----Original Message-----
> > > > > > > > > > > > > > >From: Shahram Davari
> > > > > > [mailto:Shahram_Davari@pmc-sierra.com]
> > > > > > > > > > > > > > >Sent: Monday, February 10, 2003 3:16 PM
> > > > > > > > > > > > > > >To: Martin, David [SKY:QW10:EXCH];
> > > > > > stds-802-3-efm@ieee.org
> > > > > > > > > > > > > > >Subject: RE: [EFM] Question
> regarding OAM in
> > > > > > 802.3ah D1.3
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >David,
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >I like to agree with you, but from layering
> > > > > > architectural
> > > > > > > > > > > > > > point of view,
> > > > > > > > > > > > > > >the EOS box does not have to implement MAC
> > > > > > > > > > > > > > >layer (i.e., do any MAC lookup), rather a
> > > > > > P-2-P EOS is a
> > > > > > > > > > > > > > kind of port
> > > > > > > > > > > > > > >transport in which all traffic coming form
> > > > > > an Ethernet port
> > > > > > > > > > > > > > are send over
> > > > > > > > > > > > > > >a specific SONET channel.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >Please see further comments in-line:
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >Thanks,
> > > > > > > > > > > > > > >-Shahram
> > > > > > > > > > > > > > >-----Original Message-----
> > > > > > > > > > > > > > >From: David Martin
> > > > > > [mailto:dwmartin@nortelnetworks.com]
> > > > > > > > > > > > > > >Sent: Monday, February 10, 2003 3:00 PM
> > > > > > > > > > > > > > >To: stds-802-3-efm@ieee.org
> > > > > > > > > > > > > > >Subject: RE: [EFM] Question
> regarding OAM in
> > > > > > 802.3ah D1.3
> > > > > > > > > > > > > > >Shahram,
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >This question is somewhat out of scope wrt
> > > > > > EFM, but the
> > > > > > > > > > > > > > answer is yes, the
> > > > > > > > > > > > > > >EFM OAMPDU flow must be terminated at the
> > > > > > Provider Edge.
> > > > > > > > > > > > > > Otherwise it
> > > > > > > > > > > > > > >would flow through the provider's SONET
> > > > > > network and get
> > > > > > > > > > > > > > mixed in with a
> > > > > > > > > > > > > > >separate EFM OAMPDU flow at the far end.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >SD=> Which separate OAMPDU flow?
> do you mean
> > > > > > from ONU2 to OLT2?
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > > Note that you have the terms ONU /
> > > OLT reversed.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >So the ONU is the customer side?
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >This "filter function" is being defined in
> > > > > > the ITU-T SG15 /
> > > > > > > > > > > > > > Q.12 work in
> > > > > > > > > > > > > > >draft G.ethna (was G.etna) and in the
> > > OIF UNI v2.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >Thanks I will have a look.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >The PE-PE, or SONET portion is not an EFM
> > > > > > link, but rather a
> > > > > > > > > > > > > > SONET path,
> > > > > > > > > > > > > > >which has its own OAM (i.e. POH).
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >Agree.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >...Dave
> > > > > > > > > > > > > > >David W. Martin
> > > > > > > > > > > > > > >Nortel Networks
> > > > > > > > > > > > > > ><mailto:dwmartin@ieee.org>dwmartin@ieee.org
> > > > > > > > > > > > > > >+1 613 765-2901 (esn 395)
> > > > > > > > > > > > > > >~~~~~~~~~~~~~~~~~~~~
> > > > > > > > > > > > > > >-----Original Message-----
> > > > > > > > > > > > > > >From: Shahram Davari
> > > > > > [mailto:Shahram_Davari@pmc-sierra.com]
> > > > > > > > > > > > > > >Sent: Monday, February 10, 2003 2:13 PM
> > > > > > > > > > > > > > >To: stds-802-3-efm@ieee.org
> > > > > > > > > > > > > > >Subject: [EFM] Question regarding OAM in
> > > > > 802.3ah D1.3
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >Hi,
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >802.3ah section 57 says that the
> OAM defined
> > > > > > is for single
> > > > > > > > link (or
> > > > > > > > > > > > > > >emulated link), and should not be forwarded
> > > > > > by bridges/switches.
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >My question is, in case of Ethernet over
> > > > > > SONET transport
> > > > > > > > > > > > > > (GFP + Virtual
> > > > > > > > > > > > > > >concatenation), should the OAMPDU be
> > > > > > terminated at the EOS
> > > > > > > > > > > > > > device or it
> > > > > > > > > > > > > > >should be transparently transported?
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >Consider this example:
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >OLT1 -------------- ONU
> > > 1------------------ ONU 2
> > > > > > > > ------------ OLT 2
> > > > > > > > > > > > > > > Ethernet SONET
> > > > > > > > Ethernet
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >Assume OLT1 and OLT2 are the customer
> > > > > > equipments and ONU1
> > > > > > > > > > > > > > and ONU2 are
> > > > > > > > > > > > > > >provider
> > > > > > > > > > > > > > >transport equipments that
> transport Ethernet
> > > > > > over SONET (but
> > > > > > > > > > > > > > don't do any
> > > > > > > > > > > > > > >switching/bridging).
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >In this case should ONU1 terminate OAMPDUs
> > > > > > from OLT1 or it
> > > > > > > > > > > > > > should sent
> > > > > > > > > > > > > > >them transparently to OLT2?
> > > > > > > > > > > > > > >In other words is OLT1--ONU1 considered a
> > > > > > single link? what
> > > > > > > > > > > > > > about ONU1 to
> > > > > > > > > > > > > > >ONU2, is this also a link?
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > > >Thanks in advance,
> > > > > > > > > > > > > > >Shahram Davari
> > > > > > > > > > > > > > >Senior Product Research Engineer
> > > > > > > > > > > > > > >R&D Research Ottawa
> > > > > > > > > > > > > > >PMC-Sierra, Inc.
> > > > > > > > > > > > > > >Phone: (613) 271-4018
> > > > > > > > > > > > > > >Fax: (613) 271-6468
> > > > > > > > > > > > > > >
> > > > > > > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > -----------------------------------------
> > > > > > > > > Benjamin Brown
> > > > > > > > > AMCC
> > > > > > > > > 200 Minuteman Rd
> > > > > > > > > 3rd Floor
> > > > > > > > > Andover, MA 01810
> > > > > > > > > 978-247-8022 - Work
> > > > > > > > > 603-491-0296 - Cell
> > > > > > > > > 978-247-0024 - Fax
> > > > > > > > > 603-798-4115 - Home Office/Fax
> > > > > > > > > bbrown@amcc.com
> > > > > > > > > -----------------------------------------
> > > > > >
> > > > >
> > >
>
>
> --
> -----------------------------------------
> Benjamin Brown
> AMCC
> 200 Minuteman Rd
> 3rd Floor
> Andover, MA 01810
> 978-247-8022 - Work
> 603-491-0296 - Cell
> 978-247-0024 - Fax
> 603-798-4115 - Home Office/Fax
> bbrown@amcc.com
> -----------------------------------------
>