Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [HSSG] Topics for Consideration: Jumbo Frames



Since 802.3 has a speed agnostic MAC specification, wouldn't we want to keep it that way and therefore not make jumbo frames an HSSG specific work item?
Menachem
Sent from my Blackberry 


-----Original Message-----
From: Michael Johas Teener <Mikejt@xxxxxxxxxxxx>
Date:         Wed, 9 Aug 2006 12:35:56 
To:STDS-802-3-HSSG@xxxxxxxxxxxxxxxxx
Subject: Re: [HSSG] Topics for Consideration: Jumbo Frames

Jumbo frames are great as long as you stay in the HS environment. A jumbo
frame hitting a 100baseT (or, heaven help us, a 10baseT) link will mess with
any QoS assumptions. Nasty things will happen bridging to non-Ethernet 802
LANs as well. I think this question needs to be addressed at a combo
802.1/802.3 level since it is a real architecture issue ...


On 8/9/06 12:09 PM, "Joel Goergen" <joel@xxxxxxxxxxxxxxxxxxx> wrote:

> Mike,
> 
> My preference is to associate this with MAC objectives.  In past meetings
> where this has been addressed, the atmosphere was 'tense'. Thus best to get
> the debate over with asap and move on.
> 
> I don't know at this point how to address your question.  I suspect that since
> 'all' of us support jumbos and we are inter-operable, that there is a
> compelling argument to spec it but not change it.
> 
> Both my position and that of the customers I deal with is that higher speeds,
> 10gbps included, is more efficient with the larger packets.
> 
> -joel
> 
> Mike Bennett wrote:
>>  Joel,
>>  
>> Wouldn't jumbos be something better addressed separately?  How do we deal
>> with backwards compatibility?
>>  
>> Mike
>>  
>> Joel Goergen wrote:
>>>    All,
>>>  
>>> If I go to any search engine and input "jumbo ethernet frames chips", I will
>>> see that every system and silicon vendor supports jumbo ethernet frames