Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3_MAINT] FW: Sponsor Ballot Invitation for IEEE P802.3 (IEEE 802.3bh) Maintenance #10 (Revision)



Title: FW: Sponsor Ballot Invitation for IEEE P802.3 (IEEE 802.3bh) Maintenance #10 (Revision)

Forwarding onto the maintenance reflector in case you missed this on the 802.3 reflector.

Please note the Nov 19th closing deadline

Regards

Wael

 

-----Original Message-----
From: Wael Diab [mailto:wdiab@xxxxxxxxxxxx]
Sent: Monday, October 31, 2011 9:56 AM
To: STDS-802-3@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-3] Sponsor Ballot Invitation for IEEE P802.3 (IEEE 802.3bh) Maintenance #10 (Revision)

Dear Colleagues,

Apologies to those that have already seen this announcement but this is a courtesy note for those that have not.

The IEEE P802.3 (IEEE 802.3bh) Maintenance #10 (Revision) project has just completed its 1st Working Group recirculation ballot. In preparation for this project to move forward to Sponsor ballot, the Sponsor balloting group invitation is open.

If you are interested in participating in the sponsor ballot of IEEE P802.3 (IEEE 802.3bh) Maintenance #10 (Revision), please follow the instruction below before 11:59pm ET on 19th Nov 2011.

Best regards,

Wael William Diab
Vice Chair, IEEE 802.3 Ethernet Working Group
wdiab@xxxxxxxxxxxx

David Law
Chair, IEEE 802.3 Ethernet Working Group
dlaw@xxxxxx


-----Original Message-----

From: IEEE-SA [mailto:sa-ballot@xxxxxxxx]
Sent: 10 October 2011 13:44
Subject: Invitation to Ballot, P802.3

To: undisclosed-recipients:;
Cc: "C/LM/WG802.3 Chair" <david_law@xxxxxxxx>, "C/LM/WG802.3 Chair" <dlaw@xxxxxx>, "C/LM Chair" <p.nikolich@xxxxxxxx>, "C/LM/WG802.3 Project Staff Liaison" <k.bennett@xxxxxxxx>
Subject: Invitation to Ballot, P802.3


***** SPONSOR BALLOT INVITATION *****
You have indicated an interest in balloting IEEE Standards documents.

IMPORTANT! To participate, you must have access to myProject through an IEEE Web Account.

If you would like to participate in IEEE Standards Sponsor Ballot
P802.3
Title: Standard for Ethernet
you must enroll as a member of the ballot group by 19-Nov-2011, 11:59 p.m. Eastern Time.

***** IEEE STANDARD DOCUMENT INFORMATION *****
The IEEE Computer Society Society/Standard for Ethernet invites you to participate in the Revision Sponsor Ballot for:
P802.3
Title: Standard for Ethernet
Scope: This standard defines Ethernet local area, access and metropolitan area networks. Ethernet is specified at
selected speeds of operation; and uses a common media access control (MAC) specification and management
information base (MIB). The Carrier Sense Multiple Access with Collision Detection (CSMA/CD)
MAC protocol specifies shared medium (half duplex) operation, as well as full duplex operation. Speed specific
Media Independent Interfaces (MIIs) provide an architectural and optional implementation interface to
selected Physical Layer entities (PHY). The Physical Layer encodes frames for transmission and decodes
received frames with the modulation specified for the speed of operation, transmission medium and supported
link length. Other specified capabilities include: control and management protocols, and the provision
of power over selected twisted pair PHY types.


***** ENROLLMENT INSTRUCTIONS *****

Go directly to:

https://development.standards.ieee.org/my-site/open-ballot-invitations

Or, follow this process:

1. Log onto myProject; click the link for myBallot.
2. Click the link for myBallot (if applicable); click the link for "Show/Join Open Ballot Invitations":  https://development.standards.ieee.org/my-site/open-ballot-invitations
3.  Scroll down until you find the open ballot group of interest to you; then scroll over to the right margin and click "join" under the "Actions" column.
4.  Enter or select an affiliation from the drop down menu (appearing as you key in your affiliation in the Organization window), select your classification category, and click "OK" at the bottom of the screen.  You will receive an on-screen confirmation that you successfully joined the group.

If you are not an IEEE SA Member, you can either enroll in a single ballot by paying a per ballot fee or you can join the IEEE SA by choosing an option link below.  Joining the IEEE SA entitles you to participate in as many sponsor ballots as you like for the year.

OPTION 1 - I am already an IEEE Member and I want to add Standards Association Membership. Go to: http://www.ieee.org/membership_services/index.htmlOPTION 2 - I am not an IEEE Member but would like to enroll in both IEEE and IEEE Standards Association. Go to: http://www.ieee.org/membership_services/membership/join/index.html
OPTION 3 - I am not interested in becoming an IEEE Member, however I would like to enroll as a Standards Association Member only. Go to: http://standards.ieee.org/sa-mem/join.html

============================================
OBLIGATIONS AND RESPONSIBILITIES OF BALLOTERS
============================================
Balloting group members are selected to vote on the acceptability of a new or revised standard, or on the reaffirmation of a published standard submitted by the Sponsor; based on interest in and commitment to reviewing and voting on a specific existing or proposed standard.

Once the document is ready to be balloted, you will receive notification via email.  You will typically have 30 days to review the document and return the ballot with your vote.  By agreeing to participate in this ballot you have an *obligation* to respond.  Failure to return a completed ballot may disqualify you from participating in future ballots.

Thank you for your interest in this ballot.