Draft standards within the IEEE 802.3 Ethernet Working Group pass through two balloting cycles, first through IEEE 802.3 Working Group Ballot, then through Sponsor Ballot. If you wish to take part in the Sponsor Ballot of the IEEE P802.3-2015/Cor 1 (IEEE 802.3ce) draft please follow the instructions found below. Please note that you have to join the ballot group by 15-October-2016, 23:59 Eastern Time.
If you have any questions, please contact me or the IEEE 802.3 Working Group chair, David Law <David_Law@xxxxxxxx
Chair, IEEE P802.3-2015/Cor 1 (IEEE 802.3ce) Multilane timestamping Task Force
If you are an IEEE-SA member:
Follow this process:
3. Scroll down until you find IEEE P802.3-2015/Cor 1 (IEEE 802.3ce); then scroll over to the right margin and click "join" under the "Actions" column. If you cannot see IEEE P802.3-2015/Cor 1 (IEEE 802.3ce) please check the 'Show All Open Ballot Invitations' box.
4. Enter or select an affiliation from the drop down menu (appearing as you key in your affiliation in the Organization window), select your classification category, and click "OK" at the bottom of the screen. You will receive an on-screen confirmation that you successfully joined the group.
If you are not an IEEE SA Member:
You can either enroll in a single ballot by paying a per ballot fee or you can join the IEEE SA by choosing an option link below. Joining the IEEE SA entitles you to participate in as many sponsor ballots as you like for the year.
OBLIGATIONS AND RESPONSIBILITIES OF BALLOTERS
Once the document is ready to be balloted, you will receive notification via email. You will typically have 30 days to review the document and return the ballot with your vote. By agreeing to participate in this ballot you have an *obligation* to respond. Failure to return a completed ballot may disqualify you from participating in future ballots.