This is the announcement of the electronic IEEE 802.3 Working Group 1st recirculation ballot on the Amendment IEEE P802.3-2015/Cor 1 (IEEE 802.3ce) Multilane Timestamping. Remember that voting, as well as attendance, is a requirement to maintain your IEEE 802.3 member (voter) status <http://ieee802.org/3/rules/member.html#DOT3
>. Instructions for accessing the draft, casting your ballot and submitting comments follow this announcement. Please review the commenting instructions below to ensure you are using the most up to date tools.
The ballot group for this draft is the IEEE 802.3 voting membership as of Friday 29th July 2016.
Because this is a recirculation ballot, YOU ONLY NEED TO CAST A BALLOT IF YOU WISH TO CHANGE YOUR VOTE FROM THAT WHICH WAS RECORDED ON THE INITIAL BALLOT OR LAST RECIRCULATION. If you voted previously and your vote has not changed, the last ballot cast will be carried over to this ballot and you do not need to cast a new ballot.
During this IEEE 802.3 Working Group 1st recirculation ballot, the scope of the ballot is the substantive changes between IEEE P802.3-2015/Cor 1 (IEEE 802.3ce)/D1.0 and IEEE P802.3-2015/Cor 1 (IEEE 802.3ce)/D1.1. There are no unsatisfied negative comments.
Friday 23rd September 2016
Friday 7th October 2016 23:59 AOE
The Project Authorization Request for this Amendment is available at <http://ieee802.org/3/ce/P802.3-2015-Cor_1_PAR.pdf
> and includes the following:
Standard for Ethernet - Corrigendum 1: Multilane Timestamping
SCOPE OF PROJECT:
Clarification of which lane of the media dependent interface (MDI) of a multilane Physical Layer entity (PHY) is used as the timestamping reference point.
NEED FOR THE PROJECT:
The lane of the MDI of a multilane PHY that should be used as the timestamping reference point needs to be specified. Otherwise, the entire inter-lane skew may need to be accounted for in the receive minimum and receive maximum path data delay register values, impacting the timing accuracy that can be supported.
Thank you for your participation in this ballot and careful review of the draft.
Chair, IEEE 802.3 Ethernet Working Group
Phone: +44 1631 563729
Chair, IEEE P802.3-2015/Cor 1 (IEEE 802.3ce) Multilane Timestamping Task Force
Phone: +1 610 712 3508