[STDS-802-3-MAINT] [v120] Re: 802.3cq - inrush baseline v110
Hi all,
Please find a new version of the baseline.
It was brought to my attention that our new inrush rules actually relax the inrush requirement in a particular case.
When a PSE assigns Class 4, per the current text and state diagram, the PD must obey a Class 3 power limit until Tdelay.
Our new section relaxes that to drawing less than 400mA. Ultimately we need both of these requirements.
The new version v120 adds a new requirement (last sentence) to address this.
I've also added the original subclause for reference.
Kind regards,
Lennart
On Tue, 2018-10-23 at 22:47 +0200, Lennart Yseboodt wrote:
Hi all,
Attached updated text for the PD inrush section as discussed on the last adhoc.
I put in two variants for the informative piece of text describing PSE inrush behavior. At the next adhoc call let's pick one of these.
Kind regards,
Lennart
To unsubscribe from the STDS-802-3-MAINT list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-MAINT&A=1
Attachment:
yseboodt_1118_03_inrush.pdf
Description: yseboodt_1118_03_inrush.pdf