Thread Links			Date Links
Thread Prev	Thread Next	Thread Index	Date Prev	Date Next	Date Index

Re: [8023-POEP] isolation problem

To: STDS-802-3-POEP@xxxxxxxxxxxxxxxxx
Subject: Re: [8023-POEP] isolation problem
From: "Dove, Dan" <dan.dove@xxxxxx>
Date: Wed, 14 Jun 2006 10:58:35 -0700
In-Reply-To: A<002c01c68fcd$270e6400$6401a8c0@OFFICE>
List-Help: <http://listserv.ieee.org/cgi-bin/wa?LIST=STDS-802-3-POEP>, <mailto:LISTSERV@xxxxxxxxxxxxxxxxx?body=INFO STDS-802-3-POEP>
List-Owner: <mailto:STDS-802-3-POEP-request@xxxxxxxxxxxxxxxxx>
List-Subscribe: <mailto:STDS-802-3-POEP-subscribe-request@xxxxxxxxxxxxxxxxx>
List-Unsubscribe: <mailto:STDS-802-3-POEP-unsubscribe-request@xxxxxxxxxxxxxxxxx>
Reply-To: "Dove, Dan" <dan.dove@xxxxxx>
Sender: owner-stds-802-3-poep@xxxxxxxx
Thread-Index: AcaPy2m+VVdzV92FT82+iLmV8nRv4wAAZqrQAAPEaAA=
Thread-Topic: [8023-POEP] isolation problem

Steve,

I modified your drawing to address DC isolation requirements of 802.3af.

Dan

------------ Previous Message Below ------------

From: owner-stds-802-3-poep@xxxxxxxx [mailto:owner-stds-802-3-poep@xxxxxxxx] On Behalf Of Steve Robbins
Sent: Wednesday, June 14, 2006 9:11 AM
To: STDS-802-3-POEP@xxxxxxxxxxxxxxxxx
Subject: [8023-POEP] isolation problem

Sorry, this time the figure is attached.

From: Steve Robbins [mailto:steve@xxxxxxxxxxxxx]
Sent: Wednesday, June 14, 2006 8:59 AM
To: STDS-802-3-POEP@xxxxxxxxxxxxxxxxx
Subject:

Guys,

I think we have a problem. See attached diagram.

Steve

Isolation Problem-dd.pdf

References:
- [8023-POEP] isolation problem
  - From: Steve Robbins

Prev by Date: Re: [8023-POEP] isolation problem
Next by Date: Re: [8023-POEP] isolation problem
Prev by thread: Re: [8023-POEP] isolation problem
Next by thread: Re: [8023-POEP] isolation problem
Index(es):
- Date
- Thread