Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [8023-POEP] 2 Event Classification state diagram



Does this mean that an afPD could become an atPD by means of a software upgrade?

Then, if the PSE is an atPSE, the upgraded afPD could benefit from reclassification.

John

-----Original Message-----
From: owner-stds-802-3-poep@xxxxxxxx
[mailto:owner-stds-802-3-poep@xxxxxxxx]On Behalf Of Clay Stanford (LTC)
Sent: Thursday, July 13, 2006 12:48 PM
To: STDS-802-3-POEP@xxxxxxxxxxxxxxxxx
Subject: Re: [8023-POEP] 2 Event Classification state diagram


QUESTION:
>In slide 4, when atPSE sees 1-1, 2-2, etc, the atPSE
> assumes an afPD.
> 
> But if an atPD wanted, for example, to request
> 3.84W, does the atPD use the class 1-1?
> 
> In that case how does the atPSE know that the PD is
> an atPD and not an afPD?

ANSWER:
Yes, an .atPD that wants 3.84, 6.49, or 12.95W would
use 1-1, 2-2, or 3-3 respectively.

In this case, the .atPSE does not know the .atPD is in
fact an .atPD.  It thinks it is an .afPD.  (The .atPD
does know the PSE is an .atPSE.)

Subsequently, if the .atPSE desires to use layer 2
classificaiton, it would need to poll the PD to see if
it responds.  (Alternately, the .atPD could announce
to the PSE that it is an .atPD.)

clay


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com