Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [8023-POEP] classification section intro text



Yair-

Because impedance is what is supplied by the PD
It is not a current source

Geoff

At 10:22 AM 10/19/2007 , Darshan, Yair wrote:

Goeff ,

The spec. specify current range for each class. Why you prefer impedance?

Yair

 

From: owner-stds-802-3-poep@IEEE.ORG [mailto:owner-stds-802-3-poep@IEEE.ORG] On Behalf Of Geoff Thompson
Sent: Thursday, October 18, 2007 8:56 PM
To: STDS-802-3-POEP@LISTSERV.IEEE.ORG
Subject: Re: [8023-POEP] classification section intro text

 

Chad-

Please change one sentence to be more precise:

From

Hardware Physical Layer (HPL) classification occurs before power-on when the PSE asserts a voltage onto the PI and the PD responds with a current representing a limited number of power classifications.

To

Hardware Physical Layer (HPL) classification occurs before power-on when the PSE asserts a specificed signal onto the PI and the PD responds with an impedance representing one of a limited number of power classifications.

Thanks

        Geoff


At 10:24 AM 10/18/2007 , Chad Jones (cmjones) wrote:

The text we are discussing in the AdHoc right now...
 

Chad Jones                                           <?xml:namespace prefix = st1 ns = "urn:schemas-microsoft-com:office:smarttags" />cmjones@cisco.com<?xml:namespace prefix = o ns = "urn:schemas-microsoft-com:office:office" />

Hardware Engineer                                 Phone: 330-523-2146

Wireless Networking Business Unit         Fax: 2238

Cisco Systems, Inc                               

Stonegate Corporate Parkway

4125 Highlander Parkway
Richfield, OH 44286                               www.cisco.com