FW: +++P802.3-2005/Cor1/D1.1 Working Group 1st recirculation ballot
All,
The 1st Working Group recirculation ballot for IEEE P802.3-2005/Cor1 (IEEE
802.3au) draft D1.1 opened yesterday. Non IEEE 802.3 voting members are
welcome to participate in submitting comments by using the instructions in
the email below but are requested to only submit technical (T) and
editorial (E) comments. ER and TR comments submitted by Non IEEE 802.3
voting members will be treated as E and T comments.
All IEEE 802.3 voting members are requested to ensure that they submit a
ballot. Disapprove ballots should be accompanied by either a TR or an ER
comment.
Regards,
David Law
----- Forwarded by David Law/GB/3Com on 31/01/2006 10:45 -----
IEEE 802.3 Working Group Voters, Observers, and Liaisons:
This is the announcement of the electronic IEEE 802.3 Working Group 1st
recirculation ballot on P802.3-2005 Corrigendum 1 (802.3au) on DTE
isolation. If you were an 802.3 voter at the time of the initial ballot of
this project (December 2005), you are a member of the P802.3-2005/Cor1 WG
ballot group. If you are a member of the WG ballot group but didn't vote
on the initial ballot, or if you wish to change your previous vote, please
cast a ballot on this recirculation ballot. If you did previously cast a
ballot on P802.3-2005/Cor1/D1.0 and your vote on this recirculation is the
same, you do not need to cast your ballot again as your previous vote is
carried over.
Instructions for accessing the draft, casting your ballot and submitting
comments follow this announcement. Because multiple 802.3 WG ballots may
run in parallel, proper subject lines on ballots and comments are
essential for your ballot and comments to be accepted.
TITLE:
Draft: Information technology -- Telecommunications and information
exchange between systems -- Local and metropolitan area networks --
specific requirements Part 3: Carrier Sense Multiple Access with Collision
Detection (CSMA/CD) Access Method and Physical Layer Specifications
Corrigendum 1
BALLOT SCOPE:
As a recirculation WG ballot, the scope of the ballot is limited to only
the changes made to create P802.3-2005/Cor1/D1.1, and the unresolved
negative comments against P802.3-2005/Cor1/D1.0.
BALLOT OPEN:
30 January 2006
BALLOT CLOSE:
14 February 2006
Thank you for your participation in this ballot and careful review of the
draft.
Bob Grow, Chair IEEE 802.3
Phone: 858-391-4622
Email: bob.grow@ieee.org
-----------------------------------------------------------------
****INSTRUCTIONS FOR BALLOTING ON: IEEE P802.3-2005/Cor1/D1.1
Instructions for accessing the ballot documents, casting your ballot and
submitting comments follow.
HOW TO ACCESS THE DRAFT:
The ballot documents are posted for your review for balloting purposes
only, and neither the documents nor access information should be copied or
redistributed to others in violation of document copyrights.
Comments are to be submitted against the change marked (diff) document.
The Cor1/D1.1 document with differences marked against Cor1/D1.0 may be
downloaded from:
http://www.ieee802.org/3/private/maint/iso_corr/d1.1/P802_cor1_D1p1_CMP.pdf
Login: <Please e-mail David_Law@ieee.org if you need this information>
Password: <Please e-mail David_Law@ieee.org if you need this information>
The file of unresolved negative comments may be downloaded from:
http://www.ieee802.org/3/au/comments/D1.0/802.3au_D1p0_unresolved.pdf
The P802.3-2005/Cor1/D1.1 draft without change marks is also provided for
your reference (do not use for comments) and may be downloaded using the
above login and password from:
http://www.ieee802.org/3/private/maint/iso_corr/d1.1/P802_cor1_D1p1.pdf
The file of all Cor1/D1.0 comments may be downloaded from:
http://www.ieee802.org/3/au/comments/D1.0/802.3au_D1p0.pdf
The documents are posted in Adobe "pdf" document format and can be
downloaded and printed if desired. If you do not have Adobe Acrobat
Reader, it is available for free downloading from Adobe at:
http://www.adobe.com/prodindex/acrobat/readstep.html
HOW TO CAST YOUR BALLOT
To assure your ballot is counted, please:
1) send your ballot to:
stds-802-3-ballot@ieee.org
2) paste the following line into the subject field:
Cor1/D1.1 Ballot
3) paste into the message body and complete the ballot form below:
-----CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------
P802.3-2005/Cor1/D1.1 WORKING GROUP BALLOT
Your Name:___________________________
___ APPROVE WITHOUT COMMENT
___ APPROVE WITH COMMENT
(All comments are non-binding)
___ DISAPPROVE
(A voter must attach specific comments for remedy. Some or all comments
are binding.)
___ ABSTAIN, Lack of Expertise
___ ABSTAIN, Lack of Time
___ ABSTAIN, Other ___________________
-----------------------end ballot form--------------------
HOW TO SUBMIT COMMENTS
Acceptable comment types:
E = Editorial
ER = Editorial Required (a binding comment that is part of a DISAPPROVE
vote, therefore only appropriate for an 802.3 voting member)
T = Technical
TR = Technical Required (a binding comment that is part of a DISAPPROVE
vote, therefore only appropriate for an 802.3 voting member)
1. Prepare your comments using the text (ASCII) form below. This will
make it possible for the editor to properly record and track all
submissions. Make as many copies of the template as necessary and submit
as an ascii text file or as part of your e-mail.
------CUT AND PASTE TEXT BELOW THIS LINE ONLY PLEASE--------
CommentID: (Leave Blank)
CommenterName:
CommenterEmail:
CommenterPhone:
CommenterCellPhone:
CommenterCompany:
Clause:
Subclause:
Page:
Line:
CommentType: (E, ER, T, or TR)
Comment:
CommentEnd:
SuggestedRemedy:
RemedyEnd:
--------------------end comment template------------------
2. Send your comments to:
stds-802-3-ballot@ieee.org
and paste into the subject line:
Cor1/D1.1 Comments