Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: Static Discharge

Title: RE: Static Discharge

a few comments:
RJ-45 pins will almost always not mate within the same few microsecond period, so there is always
some differential mode, some pair to pair mode, and some common mode currents generated by cable discharge.

Yes, the PHY must be protected, internally, or otherwise, since at ESD frequencies, the magnetics pass most of the
differential mode energy, and some common mode energy.

Do we really need the MOV to protect the PSE output when it will probably have a large output cap, and smaller caps for EMC?

Maybe, but that is an implementation detail.

As far as protecting silicon on the wire, we need to know what type of silicon process we are talking about.
A 60V power process can obviously withstand a lot more abuse on the wire than a low voltage, high speed PHY process.
One of those the devil is in the details types of problems.

- Rick