RE: PD power start up
I vote for Case 2.
>From: Dieter Knollman [mailto:djhk@xxxxxxxxxxx]
>Sent: Saturday, March 24, 2001 1:21 PM
>To: Yair Darshan
>Subject: PD power start up
>I believe we have two choices.
>Choice 1: Define a special start up case for the PD.
> In this state the PD is allowed to violate steady state
> The PD may drop the line voltage to zero.
> The PD may draw any current level.
> The PSE will supply current at a level about 1.5 times the
> The time for the start up state is limited to X ms.
>Choice 2: The PD meets steady state requirements.
> In order to receive power
> the PD input voltage is >30 volts and
> the PD current is >10ma and <350ma.
>Some violations are allowed for Y ms.
>Can we have a straw poll?