Re: Potential heating problem
Jeez I can't keep up with this thread
Jack Andresen wrote:
> Not sure what you are saying. Yes, the connectors are rated higher. So
> The weakest link is the issue. Nowhere did I challenge the connectors
> except where defective parts may be involved. I was trying to explain
> the low level board failures by postulating bad connections. I have seen
> improperly crimped plugs that create problems. I have also seen jacks
> from a major supplier that took an insertion set that made them fail the
> secondond time they were pligged into.
> So I think we may be talking at cross purposes.
> Jack Andresen
> Rick Brooks wrote:
> > Part 1.1 Type: Plain Text (text/plain)
> > Encoding: quoted-printable