|Thread Links||Date Links|
|Thread Prev||Thread Next||Thread Index||Date Prev||Date Next||Date Index|
Please see the following announcement of the new Internet-Draft covering the SNMP MIB for 802.3af. I required from Steve a presentation slot on this issue in Portland. Regards, Dan -----Original Message----- From: Internet-Drafts@xxxxxxxx [mailto:Internet-Drafts@xxxxxxxx] Sent: Tuesday, June 26, 2001 1:03 PM To: IETF-Announce; @ietf.org@xxxxxxxxxxxxxxxxxx Cc: hubmib@xxxxxxxx Subject: [Hubmib] I-D ACTION:draft-ietf-hubmib-power-ethernet-mib-00.txt A New Internet-Draft is available from the on-line Internet-Drafts directories. This draft is a work item of the Ethernet Interfaces and Hub MIB Working Group of the IETF. Title : Power Ethernet (DTE Power via MDI) MIB Author(s) : A. Berger, D. Romascanu Filename : draft-ietf-hubmib-power-ethernet-mib-00.txt Pages : 24 Date : 25-Jun-01 This memo defines a portion of the Management Information Base (MIB) for use with network management protocols in the Internet community. The document proposes an extension to the Ethernet-like Interfaces MIB [RFC2665] with a set of objects for managing a power Ethernet Powered Device (PD) and/or Power Source Equipment (PSE). A URL for this Internet-Draft is: http://www.ietf.org/internet-drafts/draft-ietf-hubmib-power-ethernet-mib-00. txt Internet-Drafts are also available by anonymous FTP. Login with the username "anonymous" and a password of your e-mail address. After logging in, type "cd internet-drafts" and then "get draft-ietf-hubmib-power-ethernet-mib-00.txt". A list of Internet-Drafts directories can be found in http://www.ietf.org/shadow.html or ftp://ftp.ietf.org/ietf/1shadow-sites.txt Internet-Drafts can also be obtained by e-mail. Send a message to: mailserv@xxxxxxxxx In the body type: "FILE /internet-drafts/draft-ietf-hubmib-power-ethernet-mib-00.txt". NOTE: The mail server at ietf.org can return the document in MIME-encoded form by using the "mpack" utility. To use this feature, insert the command "ENCODING mime" before the "FILE" command. To decode the response(s), you will need "munpack" or a MIME-compliant mail reader. Different MIME-compliant mail readers exhibit different behavior, especially when dealing with "multipart" MIME messages (i.e. documents which have been split up into multiple messages), so check your local documentation on how to manipulate these messages. Below is the data which will enable a MIME compliant mail reader implementation to automatically retrieve the ASCII version of the Internet-Draft.
- Date: Wed, 27 Jun 2001 10:43:42 +0200
- Transfer-mode: ftp.ietf.org