RE: [802.3af] Probe polarity
Unless I'm missing something, the voltage polarity is specified on page 19
in Table 1 "PSE Pinout Alternatives"
Hank Hinrichs, Principal Engineer
12220 World Trade Dr.
San Diego, CA. 92128-3765
Tel (858) 674-8208
Fax (858) 385-8000
e-mail: henryhinrichs@xxxxxxxxxxxx <mailto:henryhinrichs@xxxxxxxxxxxx>
Sent: Wednesday, December 05, 2001 11:54 AM
Subject: [802.3af] Probe polarity
There is no specification of the polarity of the probe
voltage in the conductors
- does anyone think this is neccessary?