Re: Cross-Talk

[Jack Andresen <jandresen@etslan.com>]

A balanced center tap is at zero potential. It does not tranfer high
frequency signals. By lifting the ground (to inject the power) we are
open to high frequency signals existing at the tap  due to conversion
losses. Yes, the cap will couple and equalize. Other caps to ground will
help.

Jack Andresen
****************************8

Avinom Levy wrote:

>
>
> Although my field of expertise is other than data-com, I will take the
> risk and ask a question that might have  trivial answer...
>
> The question I have is in  reference to phantom connection, when we
> apply power on the data pairs.
>
> When we connect power supply between the center-tap of the Rx and Tx
> transformers, we create low impedance path for high frequency (the
> data signal) between the two channels, as the input stage of the power
> supply includes a capacitor across the lines . Now, I understand that
> this will be true for common mode signals, while the data signals are
> differential, But as some of the differential signals do convert to
> common mode, and vise versa. Would this arrangement be able to meet
> the cross-talk attenuation between Rx and Tx lines required?
>
> If it is really a problem, I guess a solution can be in a form of
> series inductors to the DC lines, to increase the impedance to high
> frequency. If I am correct, the presentations presented on the last
> meeting did not took that into consideration, as far as addition
> costs, or the impact it might have on the discovery method.
>
>
> Avinoam Levy
>
> PowerDsine Inc.
>
> avinoaml@powerdsineusa.com
>
> Phone (631) 756 4680 Ext. 305
>
> Fax     (631) 756 4691
>
> Web-site: www.powerdsine.com