IEEE Trial-Use Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA): Exchanging Test Results and Session Information via the eXtensible Markup Language(XML) (PAR: 2007)
Standard for Software Interface for Maintenance Information Collection and Analysis (SIMICA): Exchanging Maintenance Action Information via the Extensible Markup Language (XML).
Guide for Smart Grid Interoperability of Energy Technology and Information Technology Operation With the Electric Power System (EPS), and End-Use Applications and Loads
Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques (PAR: 2003)
Recommended Practice for Determining the Peak Spatial Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz: General Requirements for using the Finite Difference Time Domain (FDTD) Method for SAR Calculations
Recommended Practice for Determining the Peak Spatial Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz: Specific Requirements for Finite Difference Time Domain (FDTD) Modeling of Vehicle Mounted Antenna Configurations
Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz: Specific Requirements for Finite Difference Time Domain (FDTD) Modeling of Mobile Phones/Personal Wireless Devices
Recommended Practice for Determining the Peak Spatial Average Specific Absorption Rate (SAR) in the Human Body from Wireless Communications Devices, 30 MHz - 6 GHz: Requirements for Using the Finite-Element Method for SAR Calculations, specifically involving Vehicle Mounted Antennas and Personal Wireless Devices
Recommended Practice for Measurements and Computation of Electric, Magnetic and Electromagnetic Fields With Respect to Human Exposure to Such Fields, 0 - 100 kHz
Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz - Amendment: Specifies Ceiling Limits for Induced and Contact Current, Clarifies Distinctions between Localized Exposure and Spatial Peak Power Density (PAR: 2005)
IEEE Standard for Architectural Building Blocks Enabling Network-Device Distributed Decision Making for Optimized Radio Resource Usage in Heterogeneous Wireless Access Networks - Amendment: Architecture and Interfaces for Dynamic Spectrum Access Networks in White Space Frequency Bands (PAR: 2009)
IEEE Standard Specification Format Guide and Test Procedure for Nongyroscopic Inertial Angular Sensors: Jerk, Acceleration, Velocity, and Displacement - Corrigendum 1: 4.7.2.6 Short-Term Stability and Annex A Sensor Dynamic Block Diagrams (PAR: 1985)
Standard for Environmental Assessment of Personal Computer Products, Including Notebook Personal Computers, Desktop Personal Computers, and Personal Computer Displays
Recommended Practice for Local and Metropolitan Area Networks: Recommended Practice for Media Access Control (MAC) Bridging of Ethernet in Local Area Networks (PAR: 1995)
IEEE Standard for Local and Metropolitan Area Networks---Virtual Bridged Local Area Networks - Amendment: Forwarding and Queuing Enhancements for Time-Sensitive Streams (PAR: 2005)
IEEE Standard for Local and Metropolitan Area Networks---Virtual Bridged Local Area Networks - Amendment: Enhanced Transmission Selection for Bandwidth Sharing Between Traffic Classes (PAR: 2005)
IEEE Standard for Local and Metropolitan Area Networks---Virtual Bridged Local Area Networks Amendment: Provider Bridging - Remote Customer Service Interfaces (PAR: 2005)
IEEE Standard for Local and Metropolitan Area Networks---Virtual Bridged Local Area Networks Amendment: Multiple Backbone Service Instance Identifier (I-SID) Registration Protocol (MIRP) (PAR: 2005)
IEEE Standard for Local and Metropolitan Area Networks---Virtual Bridged Local Area Networks Amendment: Provider Backbone Bridge Traffic Engineering (PBB-TE) Infrastructure Segment Protection (PAR: 2005)
Standard for Local and Metropolitan Area Networks - Virtual Bridged Local Area Networks - Amendment 08: Two-port Media Access Control (MAC) Relay (PAR: 1998)
Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Corrigendum 1 Timing Considerations for PAUSE Operation (PAR: 2008)
IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Amendment: Media Access Control Parameters, Physical Layers and Management Parameters for Energy-Efficient Ethernet (PAR: 2005)
IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Amendment: Media Access Control Parameters, Physical Layers and Management Parameters for 40 Gb/s and 100 Gb/s Operation (PAR: 2005)
Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access Method and Physical Layer Specifications - Amendment: MAC Control Frame for Priority-based Flow Control (PAR: 2008)
Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications (PAR: 2007)
IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Amendment: MAC enhancements for robust audio video streaming (PAR: 2007)
IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Amendment: Enhancements for Very High Throughput for operation in bands below 6GHz (PAR: 2007)
IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications - Amendment: Enhancements for Very High Throughput in the 60 GHz Band (PAR: 2007)
Standard for Information Technology - Telecommunications and information exchange between systems - Local and Metropolitan Area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications - Amendment: Accumulated maintenance changes (PAR: 1999)
Standard for Information Technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment : Wireless Access in Vehicular Environments (PAR: 2007)
Standard for Information Technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications Amendment: Mesh Networking (PAR: 2007)
Standard for Information Technology - Telecommunications and information exchange between systems -Local and Metropolitan networks -specific requirements -Part II: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: IEEE 802.11 Interworking with External Networks Amendment (PAR: 1999)
Standard for Information Technology - Telecommunications and information exchange between systems - Local and Metropolitan networks - specific requirements - Part II: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: IEEE 802.11 Wireless Network Management Amendment (PAR: 1999)
Standard for Information Technology - Telecommunications and information exchange between systems - Local and Metropolitan Area networks - Specific requirements - Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) specifications - Amendment: Extensions to Direct Link Setup(DLS) (PAR: 1999)
IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs) - Amendment: Amendment to the MAC sub-layer (PAR: 2006)
IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs) - Amendment: Active Radio Frequency Identification (RFID) System Physical Layer (PHY) (PAR: 2006)
IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low Rate Wireless Personal Area Networks (WPANs) - Amendment: Physical Layer(PHY) Specifications for Low Data Rate Wireless Smart Metering Utility Networks (PAR: 2006)
Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 15.6: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Wireless Personal Area Networks (WPANs)used in or around a body.
Standard for Local and Metropolitan Area Networks - Part 16: Air Interface for Fixed Broadband Wireless Access Systems - Improved Coexistence Mechanisms for License-Exempt Operation Amendment (PAR: 2004)
IEEE Standard for Local and Metropolitan Area Networks - Part 16: Air Interface for Fixed and Mobile Broadband Wireless Access Systems - Amendment: Advanced Air Interface (PAR: 2004)
IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 17: Resilient Packet Ring (RPR) Access Method and Physical Layer Specifications (PAR: 2004)
IEEE Standard for Information Technology - Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 17: Resilient Packet Ring (RPR) Access Method and Physical Layer Specifications - Amendment: 2 - Protected Inter-Ring Connection (PAR: 2004)
IEEE Standard for Local and Metropolitan Area Networks Part 20: Air Interface for Mobile Broadband Wireless Access Systems Supporting Vehicular Mobility - Physical and Media Access Control Layer Specification - Amendment: Management Information Base Enhancements and Corrigenda Items (PAR: 2008)
IEEE Standard for Local and Metropolitan Area Networks: Media Independent Handover Services - Amendment for Security Extensions to Media Independent Handover Services and Protocol (PAR: 2008)
Standard for Information Technology -Telecommunications and information exchange between systems - Wireless Regional Area Networks (WRAN) - Specific requirements - Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) specifications: Policies and procedures for operation in the TV Bands
Recommended Practice for Information Technology - Telecommunications and information exchange between systems - Wireless Regional Area Networks (WRAN) - Specific requirements - Part 22.2: Recommended Practice for the Installation and Deployment of IEEE 802.22 Systems
Recommended Practice for Learning Technology - Metadata Encoding and Transmission Standard (METS) Mapping to the Conceptual Model for Resource Aggregation
Recommended Practice for Learning Technology - ISO 21000-2:2005 Information Technology -- Multimedia Framework (MPEG-21) -- Part 2: Digital Item Declaration Mapping to the Conceptual Model for Resource Aggregation
Recommended Practice for Learning Technology - IMS Content Packaging Information Model (CP) Version 1.2 - Mapping to the Conceptual Model for Resource Aggregation
Recommended Practice for Learning Technology - Open Archives Initiative Object Reuse and Exchange Abstract Model (OAI-ORE) - Mapping to the Conceptual Model for Resource Aggregation
IEEE Guide: Adoptions of the Project Management Institute (PMI) Standard: A Guide to the Project Management Body of Knowledge (PMBOK Guide)-2008 (4th edition) Working Group
IEEE Guide: Adoption of the Project Management Institute (PMI) Standard: A Guide to the Project Management Body of Knowledge (PMBOK Guide)-2008 (4th edition)
Standard for Software engineering --- Software product Quality Requirements and Evaluation (SQuaRE) -- Requirements for quality of Commercial Off-The-Shelf (COTS) software product and instructions for testing (PAR: 1998)
Guide: Adoption of ISO/IEC 24748-2, Systems and software engineering -- Life Cycle Management -- Part 2: Guide for the application of ISO/IEC 15288 (System Life Cycle Processes)
Guide: Adoption of ISO/IEC 24748-3, Systems and Software Engineering--Life Cycle Management--Part 3: Guide for the Application of ISO/IEC 12207 (Software Life Cycle Processes)
Standard for Health informatics - Point-of-care medical device communication - Application gateway - HL7 (ver 2.x), Observation reporting interface (ORI)
Standard for Health informatics - Point-of-care medical device communication - Transport profile - RF wireless - Wide area (Mobile Phone) Network (wWAN)
Amendment 1 to IEEE Standard Method for the Calibration of Electromagnetic Field Sensors and Field Probes, Excluding Antennas, from 9 kHz to 40GHz: Probe Characteristics, Use and Measurement Uncertainty: Probe Use (PAR: 2005)
Standard for Requirements for Conduit & Cable Seals for Field Connected Wiring To Equipment in Petroleum And Chemical Industry exposed to pressures above 1.5 kilopascals (0.22 psi)
Guide for the Selection and Installation of Fire-Rated, Circuit Integrity Cables for Safety, Critical, and Emergency Shutdown Systems in Petroleum and Chemical Industries
Standard for Motor Control Centers Rated Up To and Including 600 Vac or 1000 Vdc with Requirements Intended to Reduce Electrical Hazards While Performing Defined Operations.
IEEE Guide for the Installation of Fire-Rated, Circuit Integrity Cables for Safety and Emergency Shutdown Systems in Petrochemical Plants, Refineries, and Marine Platforms
Recommended Practice for Collecting Data for Use in Reliability, Availability, and Maintainability Assessments of Industrial and Commercial Power Systems
Standard for a Smart Transducer Interface for Sensors and Actuators - Transducer to Microprocessor Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats (PAR: 1997)
Standard for A Smart Transducer Interface for Sensors and Actuators-- Mixed-Mode Communication Protocols and Transducer Electronic Data Sheet (TEDS) Formats - Corrigendum 1 (PAR: 2004)
Standard for a Smart Transducer Interface for Sensors and Actuators - Transducers to Radio Frequency Identification (RFID) Systems Communication Protocols and Transducer Electronic Data Sheet Formats
Guide for Test Procedures for Synchronous Machines Part I - Acceptance and Performance Testing Part II - Test Procedures and Parameter Determination for Dynamic Analysis (PAR: 1995)
Materials SC - Qualification and Type Tests for Partial Discharge (PD)-Free Electrical Insulation Systems Used in Rotating Electrical Machines Fed from Voltage Converters
Guide for Qualification and Type Tests for Partial Discharge (PD)-Free Electrical Insulation Systems Used in Rotating Electrical Machines Fed from Voltage Converters
Recommended Practice for Quality Control Testing of External Discharges on Form-Wound Coils, Roëbel Bars, Vacuum Pressure Impregnated Stator Insulation and Fully Assembled Stator Windings
Test Procedures and Requirements for Alternating Current Cable Terminations Used on Shielded Cables Having Laminated Insulation Rated 2.5 kV through 765 kV or Extruded Insulation Rated 2.5 kV through 500 kV
Guide for the Selection, Testing, Application and Installation of Cables Having Radial Moisture Barriers and/or Longitudinal Water Blocking (PAR: 1995)
Recommended Practice for Installation, Inspection, and Testing for Class 1E Power, Instrumentation, and Control Equipment at Nuclear Facilities (PAR: 2005)
Standard Criteria for the Design, Installation, and Qualification of Raceway Systems for Class 1E Circuits for Nuclear Power Generating Stations (PAR: 2001)
Nuclear power plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods - Part 3: Elongation at break
Nuclear Power Plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods Part 4: Oxidation induction techniques
Nuclear Power Plants - Instrumentation and control important to safety - Electrical equipment condition monitoring methods Part 5: Optical time domain reflectometry
Recommended Practice for the Protection of Wire-Line Communication Facilities Serving Electric Supply Locations Amendment 1 - Requirements and Conditions for Placing the Wire-Line-Fiber Cable Junction (CFJ) Inside the Zone of Influence (PAR: 2007)
IEEE Guide for the Application of Current Transformers Used for Protective Relaying Purposes - Corrigendum 1: Corrections to Equation 18 and Equation 19 (PAR: 2007)
Recommended Practice for Preferred Ratings for High-Voltage (>1000 volts) AC Circuit Breakers Designated Definite Purpose for Fast Transient Recovery Voltage Rise Times
HVCB - American National Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis Amendment 1: Capacitance Current Switching
HVCB - Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis -- Amendment 2: Transient Recovery Voltage Requirements During Power Tests
Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis -- Amendment 2: Transient Recovery Voltage Requirements During Power Tests (PAR: 1999)
HVCB - IEEE Standard for AC High Voltage Generator Circuit Breakers Rated on a Symmetrical Current Basis - Amendment 1: Supplement for Use with Generators Rated 10-100 MVA
Standard Specifications for High Voltage (> 1000 volts) Expulsion Type Distribution Class Fuses, Fuse and Disconnecting Cutouts, Fuse Disconnecting Switches, and Fuse Links and Accessories used with these Devices
HVF - Standard Specifications for High-Voltage Expulsion, Current-Limiting and Combination Type Distribution and Power Class External Fuses, With Rated Voltages from 1 kV through 38 kV, Used for the Protection of Shunt Capacitors
HVF - IEEE Guide for the Application, Operation, and Maintenance of High-Voltage Fuses, Distribution Enclosed Single-Pole Air Switches, Fuse Disconnecting Switches, and Accessories
IEEE Standard for Definite Purpose Switching Devices for Use in Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment: Revise Short-Circuit Rating and Test Requirement (PAR: 2006)
LVSD - Standard for Preferred Ratings, Related Requirements, and Application Recommendations for Low-Voltage AC (635V and below) and DC (3200V and below) Power Circuit Breakers
LVSD - Standard for Direct-Acting Trip Systems for Low-Voltage (up to 635 V) AC and General Purpose Low Voltage (up to 325 V) DC Power Circuit Breakers
RODE - IEEE Standard Requirements for Overhead Pad-Mounted, Dry Vault, and Submersible Automatic Circuit Reclosers and Fault Interrupters for Alternating Current Systems Up to 38 kV--Corrigendum 1
RODE - IEEE Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV
Standard Requirements for Subsurface, Vault, and Padmounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems up to 38 kV (PAR: 2003)
SASC - IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear---Amendment 1: Short-Time and Short-Circuit Withstand Current Tests---Minimum Areas for Multiple Cable Connections
SASC - IEEE Standard for Metal-Enclosed Low-Voltage Power Circuit Breaker Switchgear - Amendment 2: Additional Requirements for Control and Auxiliary Power Wiring in DC Traction Power Switchgear
SASC - IEEE C37.20.8 Standard for Metal-Enclosed Low-Voltage (3200V and below) Direct Current Power Circuit Breaker Switchgear for Traction Power Applications
Guide for the Application of Component Surge-Protective Devices for Use in Low-Voltage [Equal to Or Less Than 1000 V (ac) Or 1200 V (dc)] Circuits (PAR: 2005)
Standard Test Specifications for Surge-Protective Devices (SPDs) for Use on the Load Side of the Service Equipment in Low-Voltage (1000 V and Less) AC Power Circuits (PAR: 2000)
Guide for the Application of Low-Voltage (1000 Volts rms or Less) Surge Protective Devices Used on Secondary Distribution Systems (Between the Transformer Low-Voltage Terminals and the Line Side of the Service Entrance Panel)
Standard for Performance Criteria and Test Methods for Plug-in (Portable) Multiservice (Multiport) Surge-Protective Devices for Equipment Connected to a 120/240 V Single Phase Power Service and metallic conductive communication line(s)
Standard for Performance Criteria and Test Methods for Hardwired Multiservice (Multiport) Surge-Protective Devices for Equipment Connected to a 120/240 V Single Phase Power Service and metallic conductive communication line(s)
IEEE Guide for the Design, Construction, and Operation of Electric Power Substations for Community Acceptance and Environmental Compatibility - Amendment to remove references to Substation Slide Library (PAR: 1998)
IEEE Standard Environmental and Testing Requirements for Communications Networking Devices Installed in Electric Power Substations - Amendment: Additions of Definitions, DC Power Supply Requirements, History, and Testing Comments (PAR: 2009)
