IEEE/AESS Gyro and Accelerometer Panel
This site is maintained for the use of the IEEE/AESS Gyro and Accelerometer Panel in the development and maintenance of industry standards for inertial sensors and systems.
It has public areas, which may be of use to persons interested in the work of the panel, the scope of its activities, and to provide information that may be of general interest.
There are private areas, accessible by password only, which contain unapproved meeting minutes, drafts of standards, and other working materials. This information is not considered suitable for general distribution, as it has not as yet been approved as an industry standard.
A presentation to the IEEE Sierra Vista Section in July 1999 describes our structure and method of working.
This 2014 presentation describes what the GAP is and why a company or individual should support it.
The public areas that have been established are:
The private areas, accessible by password, are:
Access Private Area
Charter and Organization
Sensors Committee Annual Report 2014
Panel Operating Procedures
Committee Operating Procedures
Standards maintained by or being developed by the panel
A paper titled "Proposed IEEE Coriolis Vibratory Gyro Standard and Other Inertial Sensor Standards" was presented at IEEE PLANS 2002.
A paper titled "Proposed IEEE Inertial Systems Terminology Standard and Other Inertial Sensor Standards" was presented at IEEE PLANS 2004.
Last updated 8 February 2015
|Panel Chair||Randy Cureyfirstname.lastname@example.org|
|Panel Vice Chair||Reese Sturdevantemail@example.com|
|Systems Committee Chair||Reese Sturdevantfirstname.lastname@example.org|
|Sensors Committee Chair||Cleon Barkeremail@example.com|
|IEEE Liaison||David Tarrantfirstname.lastname@example.org|
Please do not request copies of documents in preparation. They are not releasable outside the working group until the "industry survey" phase of the approval cycle. If you have an interest in being placed on the industry survey distribution list to comment on a document in preparation, please check the Announcements
Last updated 4 February 2013
P1780 "Standard Specification Format Guide and Test Procedure for Inertial Measurement Units (IMU)" was approved by NesCom at their December meeting. The panel is looking to expand its membership with IMU producers and users as well as those with a general interest in IMUs.
Last updated 4 August 2008
Panel meetings are open to all interested persons. If you are not on the mailing list and wish to attend a meeting, please contact either the meeting host or one of the panel officers. This will enable you to obtain information on accommodations and the meeting venue and permit better planning of the meeting and the no-host dinner at the end of the first meeting day.
|18/19 Jan 2016||Honeywell
|David Fellows |
|17/18 Mar 2016||Honeywell
|Steve Becka |
|16/17 May 2016||TBD
|George Erickson |
|July 2016||UC Irvine
|Dr. Andrei Shkel|
|22/23 Sept 2016 *||Sagem
Boulogne-Billancourt, France (West of Paris)
|10/11 Nov 2016||L3 IEC
|Randy Jaffe |
*In conjunction with the 2016 Symposium Gyro Technology, which will be held in Karlsruhe, Germany on 20/21 September 2016
Last updated 6 December 2015
Problems involving access to this web site should be referred to the IEEE.
return to top