SCC21 Resources
   SCC21 Activities and Projects

2030 Smart Grid Series

1547 Interconnection Series
   P1547 (full revision)TM
      - P1547 Logistics
      - ListServ
            - Email archive
      - P1547 Drafts  (password protected)


Site Map
SCC21 Committee  (password protected)


IEEE P1547 Draft Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces
(full revision of IEEE Std 1547)

IEEE P1547 Working Group
Public Reflector Information

NOTE: The IEEE P1547 Working Group public reflector is provided for the benefit of moving the work of the Working Group forward. Use of this reflectors is subject to the IEEE E-mail Acceptable Use Practices.

Accessing Archive Messages
Click on the link below to access archive messages on the P1547 listserver. Use the Back button on your toolbar to return to this page.

P1547 listserv archive

Subscribing to the Reflector

To subscribe to the P1547 listserv, send an e-mail to with the following command in the body of the e-mail:

     Subscribe stds-p1547 lastname, firstname

Subscribe Note 1: Use of the e-mail subscribe instruction requires that you supply your Last Name followed by your First Name and will subscribe the e-mail address from which the e-mail is sourced from. The e-mail subscribe instruction does not support an e-mail address field, if you try to use an e-mail address in the Name fields it will be rejected. If you wish to subscribe an e-mail address other than the one which your e-mail is sourced from, for example the IEEE e-mail alias, you will need to use the ListServ web interface. Use of this web interface will require the creation of a login but once this login has been created it will be used for all IEEE ListServ subscriptions you wish to manage.

Subscriber Note 2: To contact the owner of the list, or if you have trouble subscribing/unsubscribing, or have questions, please send an email to

Unsubscribing from the Reflector

To unsubscribe from the IEEE P1547 listserv, send an e-mail to with the following command in the body of the e-mail:

unsubscribe stds-p1547 lastname, firstname

Sending an E-mail to All Listserv Members

To send a message to all of the people currently subscribed to the P1547 listserv, send an email to, which is called the LIST address. You must never try to send any command to that address, as it would be distributed to all the people who have subscribed. All commands used to manage your account must be sent to, which is the LISTSERV address. It is important to understand the difference between the two.

Managing Your IEEE Listserv Account
To manage your IEEE listserv account, send an e-mail with the appropriate command(s) in the body of the e-mail to The END command informs listserv to stop reading commands, so if you string commands together, only include END once at the end of the string.

Note:(* = asterisk = wildcard = all lists)

To change your e-mail address on this listserv list:
Change stds-p1547 [Your New e-mail Address]
To change your e-mail address on all IEEE lists:
Change * [Your New e-mail Address]
To remove your e-mail address from this listserv list:
Signoff stds-p1547
To remove your e-mail address from all IEEE lists:
Signoff *

(Last modified 2/12/2014 Don Gwinner)