Test Procedures for Electric Energy Storage
Systems for Electric Power Systems Applications
This project is sponsored by the IEEE-SASB
Coordinating Committee, SCC21 – Fuel Cells, Photovoltaics,
Dispersed Generation, and Energy Storage.
P2030.3 WG Secretary
Title: Standard for Test Procedures for Electric
Energy Storage Equipment and Systems for Electric Power Systems
Scope: This standard establishes test
procedures for electric energy storage equipment and systems for electric
power systems (EPS) applications. It is recognized that an
electric energy storage equipment or systems can be a single device
providing all required functions or an assembly of components, each having
limited functions. Components having limited functions shall be tested for
those functions in accordance with this standard. Conformance may be
established through combination of type, production, and commissioning
tests. Additionally, requirements on installation evaluation and periodic
tests are included in this standard.
Purpose: Storage equipment and systems
that connect to an electric power system (EPS) need to meet the
requirements specified in related IEEE standards. Standardized test procedures
are necessary to establish and verify compliance with those requirements.
These test procedures need to provide both repeatable results, at
independent test locations, and have flexibility to accommodate the variety
of storage technologies and applications.