RE: Ballot for Section 5.5 & 6.5 EMC
- To: <stephen.berger@ieee.org>, <ccorry@ejfi.org>, <ohara@bnl.gov>, <rapeterson_us@yahoo.com>, <rajendra_paul@yahoo.com>, <Gordontray@cs.com>, <nschneid@nps.navy.mil>, <r.n.smith@ieee.org>, <rt7t@bestweb.net>, <wfwelsh@essvote.com>
- Subject: RE: Ballot for Section 5.5 & 6.5 EMC
- From: "Doug Fletcher" <DFletcher@pivotint.com>
- Date: Mon, 2 Dec 2002 23:55:13 -0600
- Cc: <nmcclure@co.hartic.com>, <stds-1583-tg4@ieee.org>
- Importance: normal
- Sender: owner-stds-1583-tg4@majordomo.ieee.org
- thread-index: AcKApaECTv6ldGATTXO/G2Wcu9D0DwGwOG9QAAS5aqAExbAX4A==
- Thread-Topic: DRAFT - Ballot for Section 7 Annex
I have received replies from many of you, but still am short a 75% required response rate. If you have not replied yet, please vote on this ballot. It would greatly help us to have your reply before the meeting in Austin this Wednesday.
Thanks!
Doug Fletcher
dfletcher@pivotint.com
> -----Original Message-----
> From: Doug Fletcher
> Sent: Saturday, November 09, 2002 11:05 PM
> To: 'stephen.berger@ieee.org'; 'ccorry@ejfi.org'; 'ohara@bnl.gov'; 'rapeterson_us@yahoo.com'; 'rajendra_paul@yahoo.com'; 'Gordontray@cs.com'; 'nschneid@nps.navy.mil'; 'r.n.smith@ieee.org'; 'rt7t@bestweb.net'; 'wfwelsh@essvote.com'
> Cc: 'nmcclure@co.hartic.com'; 'stds-1583-tg4@ieee.org'
> Subject: Ballot for Section 5.5 & 6.5 EMC
>
> Attached for balloting are Sections 5.5 & 6.5, Draft v2.6.1 of the P1583 Voting Equipment Standards:
>
> Electromagnetic Compatibility
>
> The original wording came from the IEEE P1583 EMC task group in November 2001. It was submitted to the FEC and is in the current FEC Voting Equipment Voluntary Standards. Various changes are in in the attached Word document -- the significant changes are highlighted in the text. Additional edits have been submitted by the IEEE EMC Standards Committee and can be seen by turning on the "Track Changes" in Word that is in the "Tools" menu.
>
> Also attached is an Excel file to submit your comments and proposed changes. These must be submitted in the Excel format to be considered. It greatly assists with compiling all of the comments.
>
> You can vote on this ballot by replying to this email (dfletcher@pivotint.com) and filling in 4 lines below -- 3 lines with information about yourself and 1 line for your vote.
>
> ******
> IEEE P1583 - Section 5.5 & 6.5 - Draft v2.6.1
> Draft Standard for the Evaluation of Voting Equipment
>
> THIS BALLOT MUST BE RECEIVED NO LATER THAN: 30 November 2002
>
>
> Name: _____________________
> Organization: _____________________
>
> Primary or Alternate Representative? ____________________
>
> Mark one and only one of the following 6 choices:
> ______ Affirmative - Approve
> ______ Affirmative - Approve with *comments - ONLY on Revised portions of document
> ______ Negative - *Comments - ONLY on Revised portions of document
> ______ Abstain - Due to lack of time to review document
> ______ Abstain - Due to lack of expertise
> ______ Abstain - For the following reason:
>
> * Comments shall be submitted ONLY on the IEEE P1583 Ballot Comment Submission Form (attached Excel file).
>
> Doug Fletcher
> dfletcher@pivotint.com
>
> << File: D2-6-1 Sec 5-5 6-5 11-9-02.zip >>
>
>