Attendees:

1. Any issues with regard to final draft D07

2. Vote to ratify D07

3. New minor issue by Tony on LoopCharacteristics

4. Plans for ballot

Discussion:

Ratify Draft D07

• Draft D07 is approved unanimously; all changes accepted

• Tony to create a new Draft D08

UndrivenInOut < Yes | No >;

• Tony brought up an issue of adding UndrivenInOut as a new statement withing the SignalCharacteristics block. The purpose of this statement is primarily in pattern reporting and states that there are times within the pattern that a signal is not being driven by the tester or the device.

• Statement was approved by wg.

LoopCharacteristics

• Tony suggests that the statements for defining loop characteristics be embedded in a local block instead of by reference.

• wg agreed with this suggestion, with the addition that an optional name be allowed on the block

MaxEdgeTime

• Dan pointed out that the examples for MaxEdgeTime (p34?) are out of date.

• Tony agreed to fix them

Waveforms graphics from 1450.0

• Tony brought up a suggestion of adding the waveform graphics from 1450.0 (tabl;es 9, 10, 11, 12) into the 1450.3 document. The reason for this is to make it easier for users to figure out the waveforms without having to go between two documents.

• Greg objected to this idea. Only the defining document should contain the "normative" definition of any given concept.

• It is suggested that a "crib" sheet be created and published as a supporting document to all of the 1450 dots.

Ballot Plans

• The working group, having successfully worked through all the issues from the "un-official" review now feels that the standard is getting close to being ballot ready.

• One issue still remaining is a tester rule file to be provided by Jason. There are also several individuals that were not able to participate in the D06 review.

• Tony agreed to contact Jason Doege, Dave Dowding, and Gordon Robinson to see if they are willing to review and provide input prior to going to ballot.

• Greg agreed to manage the IEEE interface for the ballot process.

• WG to create a proposed ballot list

Meeting adjourned at 2:15pm

Next meeting

Date: Friday, Apr 25, 2003
Time: 1:15 to 3:00 PDT
Dial-in#: 888-635-9997
Participant code: 539645

Action Items:

AI1 - Jason - Create a TRC file for an Inovus tester

AI2 - Tony - Freeze D07 (with change bars) and create a new D08

AI3 - Tony - Make updates to D08 as described and agreed to in 4/11 meeting

AI4 - Tony - Email the above individuals about pre-ballot review

AI5 - WG - Create a proposed ballot list