Attendees: Gerald Chan, Ric Dokken, Scott Franzen, Carey Garrenton, Greg Maston, Jim O'Reilly, Ernie Wahl

Line and clause numbers if any are with regard to STIL.4 syntax document D02 dated August 8, 2016.

================================================================================
OLD BUSINESS:

1. Clause "32. TestType Definition":
    REPLACE: For each standard-defined test-type, STIL.4 or STIL.5 shall describe its function and how it uses its parameters to perform that function.
    WITH: Each standard-defined test-type shall be accompanied by a description of its function and how it uses its parameters to perform that function.
          That description should enable replicating test results across various ATE with identical electrical properties.

2. Insert in clause "21.1 Literal Values" after 2nd paragraph (rewritten from May 9, 2016 doc, Line 662):
    User-data AMPERES, CELSIUS, DECIBELS, DEGREES, FARADS, HENRIES, HERTZ, METERS, OHMS, SECONDS, VOLTS, and WATTS represent literal values with appropriate units, e.g., 100mA for AMPERES. PERCENT represents an integer or REAL followed by a percent sign, e.g., 5%. REAL represents a floating point number without units, e.g., 0.05.

3. Add "Node" to clause "3. Definitions":
    used to describe a node in a directed flow graph (flow-node) or an electrical node in a circuit

4. Syntax BNF inconsistently uses ::=, :=, and =, 7/5/2016 consensus: use ::= for BNF

5. Meta-type "next_stmt" is not defined in Syntax Document
================================================================================
CONSENSUS:

 1. 2143: accept red & strikeouts
 2. 2172: remove red
 3. 2178: delete
 4. Ref 2178: put explanation of what happens on LHS/RHS size mismatch in clause 22.11,
    NOTE: LHS = left-hand side, RHS = right-hand side
    Favored Scott/Carey proposal (contradicts current 22.11 content):
        - LHS greater than RHS size: unspecified array elements are initialized to None
	- LHS smaller than RHS size: excess array elements are discarded
 5. 2220: Remove "a copy of" and add for example-line 13 (use "instance" instead of "copy")
 6. 2225: change line to: "the right-hand side read/write permission specifies that the value can be changed but the variable cannot be deleted."
 7. 2220 - 2230: accept the rest as is after previous changes
 8. 2231: Remove "in this order"
 9. 2233: should be part of list
10. Clause "22.3 Variable Access": break up into:
    a. STIL.4 variable access
    b. Extensions to STIL.0:
        - Init Meas, ReInitAt
        - Indexing STIL.0 Spec and Category
11. Move relevant metatype definitions from "E.3.4 Variable and Parameter Attributes" to "22.1 FlowVariables Syntax"
12. 2201-2202: put in issues list: rename and explain metatype "expr"
================================================================================
ACTION ITEMS:

Jim: CONSENSUS item 1 - 9
Jim, Ric: write up proposal for CONSENSUS item 10 - 11
Ernie: CONSENSUS item 12
================================================================================