Attendees: Gerald Chan, Ric Dokken, Scott Franzen, Carey Garrenton, Greg Maston, Jim O'Reilly, Ernie Wahl

Line and clause numbers if any are with regard to STIL.4 syntax document D02 dated August 29, 2016.

================================================================================
OLD BUSINESS:

1. Clause "32. TestType Definition":
    REPLACE: For each standard-defined test-type, STIL.4 or STIL.5 shall describe its function and how it uses its parameters to perform that function.
    WITH: Each standard-defined test-type shall be accompanied by a description of its function and how it uses its parameters to perform that function.
          That description should enable replicating test results across various ATE with identical electrical properties.

2. Insert in clause "21.1 Literal Values" after 2nd paragraph (rewritten from May 9, 2016 doc, Line 662):
    User-data AMPERES, CELSIUS, DECIBELS, DEGREES, FARADS, HENRIES, HERTZ, METERS, OHMS, SECONDS, VOLTS, and WATTS represent literal values with appropriate units, e.g., 100mA for AMPERES. PERCENT represents an integer or REAL followed by a percent sign, e.g., 5%. REAL represents a floating point number without units, e.g., 0.05.

3. Add "Node" to clause "3. Definitions":
    used to describe a node in a directed flow graph (flow-node) or an electrical node in a circuit

4. Syntax BNF inconsistently uses ::=, :=, and =, 7/5/2016 consensus: use ::= for BNF

5. Meta-type "next_stmt" is not defined in Syntax Document
================================================================================
CONSENSUS:

- Clause 13. Extensions to STIL.0 Clause 19 "Spec and Selector blocks"
 1. 1781: delete line
 2. 1784: delete word "exists"
- Clause 21. Device to Tester Interface
 3. Turn clause black
- Clause 22. SignalMap
 4. 2978: use metatype stil4_id unique within package 
 5. 2979: undo superscript on closing parenthesis
 6. Turn clause black
- Clause 23. Device (FlowExtended) **** from separate PDF ****
 7. 325: use metatype stil4_id unique within package (remove footnote)
 8. 458: correct commentary line numbers
 9. Commit changes to clause 23 (ck for not found)
- Variable & Parameter separation
10. Define "spec_expr" in clause 6.2, remove definitions from other parts of document
11. Move clause <6.6 Extensions to STIL.0 Clause 6.13 "Timing Expressions and Units (time_expr)"> content to <6.2 Spec expressions and units (spec_expr)>, maintaining that STIL.4 will accept spec_expr forSTIL.0 and STIL.2 spec-variable definitions.
- Annex E 
12. Restore title
================================================================================
ACTION ITEMS:

Jim:   CONSENSUS item 1 - 2, 10 - 11

Ric:   CONSENSUS item 4 - 6

Ernie: CONSENSUS item 3, 7 - 9, 12
================================================================================