Attendees: *Gerald Chan, *Ric Dokken, *Scott Franzen, *Carey Garrenton, *Greg Maston, *Jim O'Reilly, *Ernie Wahl

Line and clause numbers if any are with regard to STIL.4 syntax document D02 dated October 03, 2016.

================================================================================
OLD BUSINESS:

1. Clause "32. TestType Definition":
    REPLACE: For each standard-defined test-type, STIL.4 or STIL.5 shall describe its function and how it uses its parameters to perform that function.
    WITH: Each standard-defined test-type shall be accompanied by a description of its function and how it uses its parameters to perform that function.
          That description should enable replicating test results across various ATE with identical electrical properties.

2. Insert in clause "21.1 Literal Values" after 2nd paragraph (rewritten from May 9, 2016 doc, Line 662):
    User-data AMPERES, CELSIUS, DECIBELS, DEGREES, FARADS, HENRIES, HERTZ, METERS, OHMS, SECONDS, VOLTS, and WATTS represent literal values with appropriate units, e.g., 100mA for AMPERES. PERCENT represents an integer or REAL followed by a percent sign, e.g., 5%. REAL represents a floating point number without units, e.g., 0.05.

3. Add "Node" to clause "3. Definitions":
    used to describe a node in a directed flow graph (flow-node) or an electrical node in a circuit

4. Syntax BNF inconsistently uses ::=, :=, and =, 7/5/2016 consensus: use ::= for BNF

5. Meta-type "next_stmt" is not defined in Syntax Document

6. Review Annex D: determine whether it's appropriate for this standard. Goal is to have ONLY informative Annexes.

7. Make sure that update to Tutorial.doc (Example: Basic Test Program) propagated to SVN trunk
================================================================================
CONSENSUS:

 Clause 25.1 SoftBinDefs syntax
 1. 3915: Add optional parentheses around softbindefs name
 2. 3941: delete from "grp_data_access_function" to but not including "BinAxes.size()"
 3. 3946: remove blank line
 4. Remove all footnotes "Function countSince is covered in clause 25.5"
 5. Move countSince from Table 15 to clause "25.5 Counters (FlowExtended)"

* Clause 25.4 Bin Axes
 6. 4080: drop meta-type and look at group and bin for same reduction a la 3941

* Clause 25.5 Counters (FlowExtended)
 7. 4088: Ernie, Scott, Carey: work on introductory paragraph to "25.5 Counters (FlowExtended)"

* Clause 26.1 HardBinDefs syntax
 8. 4105: turn black
 9. 4111: Add optional parentheses around hardbindefs name
10. 4119: change "Pass" to "Fail"
11. 4124: turn black
12. 4125: delete red

* Clause 26.2 HardBinDefs example
13. 4144 - 4150: delete example commentary
14. 4152: turn black

* Clause 27. BinMap
15. 4156 - 4158: delete blue from "Soft to hard bin mapping" on then turn paragraph black.
16. 4161: delete sentence
17. 4162: Change sentence to  "Two or more soft bins may map to the same hard bin."
18. 4164 - 4167: replace with:
    "When there are two or more axes in a group, each mapping statement shall map a cell of the resulting array to a hard bin. Multiple soft bin combinations may map to the same hard bin."
19. 4166: remove last sentence
20. 4168 - 4173: delete all but 1st and last sentence.
21. 4174 - 4176: substitute "Pass softbins or softbin combinations shall be mapped only to Pass hardbins, and Fail softbins shall be mapped only to Fail hardbins."
22. 4177: preface by: "when in FlowExtended mode"

* Clause 27.1 BinMap syntax
23. 4182 - 4185:  Change: defer optional Soft/HardBinDefs name, i.e., work through syntax/semantics, ref TestProgram, BinMap, namespaces.

* Clause 27.2 BinMap example
24. 4220 - 4236: delete example commentary.

25. Make Bin None FlowExtended, i.e., create clause 25.4 for it.

================================================================================
ACTION ITEMS:

Ernie: 1 - 25

================================================================================