Attendees: Gerald Chan, Ric Dokken, Scott Franzen, Carey Garrenton, Greg Maston, Jim O'Reilly, Ernie Wahl

Line and clause numbers if any are with regard to STIL.4 syntax document D02 dated October 17, 2016.

================================================================================
OLD BUSINESS:

1. Clause "32. TestType Definition":
    REPLACE: For each standard-defined test-type, STIL.4 or STIL.5 shall describe its function and how it uses its parameters to perform that function.
    WITH: Each standard-defined test-type shall be accompanied by a description of its function and how it uses its parameters to perform that function.
          That description should enable replicating test results across various ATE with identical electrical properties.

2. Insert in clause "21.1 Literal Values" after 2nd paragraph (rewritten from May 9, 2016 doc, Line 662):
    User-data AMPERES, CELSIUS, DECIBELS, DEGREES, FARADS, HENRIES, HERTZ, METERS, OHMS, SECONDS, VOLTS, and WATTS represent literal values with appropriate units, e.g., 100mA for AMPERES. PERCENT represents an integer or REAL followed by a percent sign, e.g., 5%. REAL represents a floating point number without units, e.g., 0.05.

3. Add "Node" to clause "3. Definitions":
    used to describe a node in a directed flow graph (flow-node) or an electrical node in a circuit

4. Syntax BNF inconsistently uses ::=, :=, and =, 7/5/2016 consensus: use ::= for BNF

5. Meta-type "next_stmt" is not defined in Syntax Document

6. Review Annex D: determine whether it's appropriate for this standard. Goal is to have ONLY informative Annexes.
================================================================================
CONSENSUS:

Binning.doc
 1. 3913, 4126: BIN_DEF_NAME is optional for FlowExtended only, Basic shall be unnamed
 2. 4090: replace title with "countSince Functions"
 3. 4094: remove
 4. 4099: replace paragraph with "At the termination of the test or flow
    triggered by a START event, soft bin counters associated with
    counter_reset_events other than START are incremented by one if the associated
    soft bin is set at that time."
 5. 4113: remove struck out text
 6. 4176 - 4177: mark as FlowExtended only
TestProgram.doc
 7. 5546: remove "Soft bin definitions" to the end of the paragraph
 8. 5635: turn black
Binning.doc
 9. Clause 25.6 Counters: turn black
10. Clause 27 (approximate):
    In FlowExtended mode, SoftBinDefs and HardBinDefs may be referred to inside
    the BinMap block and then become visible within the scope of the
    TestProgram block. Absent the BinMap reference, the TestProgram shall use
    the unnamed SoftBinDefs block if present.

    In Basic mode there shall be no SoftBinDefs and HardBinDefs reference and
    the unnamed SoftBinDefs block if present is used.
================================================================================
ACTION ITEMS:

Jim: CONSENSUS item 1 - 10

================================================================================