Motion P-1788/M0000: Accept TheDocument

[Małgorzata Jankowska <malgorzata.jankowska@xxxxxxxxxxxxx>]

Dear Sirs.
I vote YES on this Motion.

With best regards
        Malgorzata Jankowska
--

Ph.D. Eng. Malgorzata A. Jankowska

 

POZNAN UNIVERSITY OF TECHNOLOGY

Institute of Applied Mechanics

Jana Pawla II 24, 60-965 Poznan, Poland

www.tm.am.put.poznan.pl

 

E-mail: malgorzata.jankowska@xxxxxxxxxxxxx

Phone: +48 61 665-20-69

---

Od: "George Corliss" <george.corliss@xxxxxxxxxxxxx>
Do: "stds-1788" <STDS-1788@xxxxxxxxxxxxxxxxx>
DW: "George Corliss" <george.corliss@xxxxxxxxxxxxx>, "Ralph Baker Kearfott" <rbk5287@xxxxxxxxxxxxx>
Wysłane: piątek, 6 czerwiec 2014 14:02:03
Temat: Re: Correction [P1788] Motion P-1788/M0000: Accept TheDocument -- Voting begins

I vote YES

George Corliss


On Jun 2, 2014, at 9:52 AM, Ralph Baker Kearfott <rbk5287@xxxxxxxxxxxxx> wrote:

P-1788,
 
 Please accept my apologies.  The editors include
 Nedialko Nedialkov, in addition to John, Christian,
 Dima, and Juergen.
 
 Best regards,
 
 Baker
 
 P-1788:
 
 The technical editors (John Pryce, Christian Keil,
 Дмитрий Надежин, Jürgen Wolff von Gudenberg) have put the
 finishing touches on our standards document, in accordance
 with the positions we have voted and our numerous discussions.
 The editors have moved (and seconded) the motion that:
 
    The attached document be accepted as our standard.
 
 Voting on this motion will continue until after Monday, June 23,
 2014.  Voting will be counted according to the rules for
 standards text.  The document will not change during the voting.
 Remember that, if you vote "no", you must give the changes that,
 if made, would cause you to vote "yes."
 
 When making comments and corrections, please indicate whether
 they are editorial (such as correcting spelling or minor
 rewording), or substantive.  Editorial corrections, unless
 judged to be controversial, will be considered as friendly
 amendments, and will not precipitate a re-vote.  Please
 read the document carefully.
 
 After a successful vote, we will deliver the document to
 the Microprocessor Standardization Committee, where an
 additional Sponsor Ballot vote will take place.  After a
 successful Sponsor Ballot, the IEEE Standards Association
 will review the process for fairness and correctness.  Once
 the review is successfully completed, the document becomes
 a standard.
 
 If you are interested in voting on the Sponsor Ballot, now
 might be a good time to join the IEEE Standards Association,
 and express your interest in being a member of the Sponsor
 Ballot Group (through checking the appropriate box in
 the list of projects under MyProject).
 
 PLEASE NOTE:  The attached draft is not public, and must
    not be delivered beyond the working group.  This is in
    accordance with IEEE Standards Association rules.
 
 Best regards,
 
 Baker
 --
 
 ---------------------------------------------------------------
 Ralph Baker Kearfott,   rbk@xxxxxxxxxxxxx   (337) 482-5346 (fax)
 (337) 482-5270 (work)                     (337) 993-1827 (home)
 URL: http://interval.louisiana.edu/kearfott.html
 Department of Mathematics, University of Louisiana at Lafayette
 (Room 217 Maxim D. Doucet Hall, 1403 Johnston Street)
 Box 4-1010, Lafayette, LA 70504-1010, USA
 ---------------------------------------------------------------
 
 <P1788_MAIN.pdf>