Re: [STDS-802-11-TGBE] PDT-MAC-MLO-TID-link-mapping/link management: Default mode and link enablement

["Cariou, Laurent" <laurent.cariou@xxxxxxxxx>]

I will, sorry for that

 

From: Edward Au <edward.ks.au@xxxxxxxxx>
Sent: Tuesday, August 25, 2020 6:12 AM
To: Cariou, Laurent <laurent.cariou@xxxxxxxxx>
Cc: STDS-802-11-TGBE@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBE] PDT-MAC-MLO-TID-link-mapping/link management: Default mode and link enablement

 

Hello Laurent,

For your figure in 20/1256r0 (Figure xxx – Example of operation of a single radio non-AP MLD with default mapping (all TIDs mapped to all setup links), where the non-AP MLD transitions from operating on link 1 with STA 1 to operating on link 2 with STA 2.), would you attach the source visio file to the document and upload it as revision 1?

Thanks and Regards,
Edward

 

On Thu, Aug 20, 2020 at 2:33 PM Cariou, Laurent <laurent.cariou@xxxxxxxxx> wrote:

Hi all,

I uploaded draft text proposal for PDT-MAC-MLO TID-link-mapping/link management: Default mode and link enablement

 

https://mentor.ieee.org/802.11/dcn/20/11-20-1256-00-00be-pdt-mac-mlo-tid-mapping-link-management-default-mode-and-enablement.docx

 

Please let me know if there are comments.

 

Thanks,

Laurent

              

---

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1

---

To unsubscribe from the STDS-802-11-TGBE list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBE&A=1