Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11-TGBF] Discussion on CID187 in doc.: 22/0927r2



Hi Chris,

 

Thanks for preparing this CR.

Please note that CID 187 in your doc.: 22/0927r2 is the same with CID 138 in my SP passed CR doc.: 22/1170r2.

To keep the resolutions to the two CIDs consistent, my suggestion during the call is that: only change “instance” to “setup” is enough.

Therefore, the revised text should be “A sensing measurement setup is active until terminated in a sensing measurement setup termination. (#138, #187)”

 

Best regards,

Pei Zhou

 


OPPO

本电子邮件及其附件含有OPPO公司的保密信息,仅限于邮件指明的收件人使用(包含个人及群组)。禁止任何人在未经授权的情况下以任何形式使用。如果您错收了本邮件,请立即以电子邮件通知发件人并删除本邮件及其附件。

This e-mail and its attachments contain confidential information from OPPO, which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction, or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this e-mail in error, please notify the sender by phone or email immediately and delete it!


To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1