Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [STDS-802-11-TGBF] TGbf meeting on December 12, 13

Tony,

 

                A few of us have gone through the comments on the sensing measurement report.  We believe almost all of them have been addressed by other PDT documents.   We pulled out a comment on timestamp since this is being handled separately.  Please add the following CR document to the queue.

 

                22/2194r0, “Comment Resolution on Sensing Measurement Report,” Steve Shellhammer (Qualcomm), 20 minutes

 

                If for some reason someone feels we have not addressed any of these comments already we can always pull them from this list and handle then afterwards.

 

                I have another call for the first hour tomorrow morning and will join after that, just so you know.

 

Regards,

Steve

 

From: Hanxiao (Tony, WT Lab) <0000177ab8f731c4-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Sunday, December 11, 2022 7:39 PM
To: STDS-802-11-TGBF@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBF] TGbf meeting on December 12, 13

 

WARNING: This email originated from outside of Qualcomm. Please be wary of any links or attachments, and do not enable macros.

Dear all,

This is a reminder and call for submissions for the upcoming meeting on:   

  • December       12   (Monday),     09：00 - 11:00 ET -- CAC
  • December       13   (Tuesday),    09：00 - 11:00 ET

 

Please note:

  1. Please send the agenda request at least 24 hours prior to the call, following the format below:

•     DCN, Title, Author (affiliation), Time duration

  1. I will cancel the call if there is no request received 24 hours prior to a call.
  2. Please upload your submissions (revision 0) on mentor 24 hours prior to the meeting so that members would have a chance to review those submissions offline. Otherwise,
    1. If there is not enough time during the meeting, the presentation will be delayed to the next meeting.
    2. If there is enough time during the meeting, the presentation will be moved to the end of the queue and be presented in the end. However, any related SP should be delayed to the next meeting.
  1. Please send the motion request (with related DCN, and SP result) around 10+5 days before the meeting (for teleconference, not for Plenary or Interim meeting), so that the TG chair could send the 10 day advance notice to the 802.11 reflector, after getting the approval from the WG chair.
  2. Dial-in information:
    • December  12   (Monday),     09：00 - 11:00 ET

 

    • December 13   (Tuesday),    09：00 - 11:00 ET

 

Best Regards : )

Tony Xiao Han

To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1

To unsubscribe from the STDS-802-11-TGBF list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBF&A=1