Hi Manasi,
Thanks.
I changed the resolution of #2418 to revised. For Default Mode field, I received the feedback that some member prefer what is in the document.
Best Regards,
Liwen
From: Manasi E <emanzee@xxxxxxxxx>
Sent: Tuesday, July 29, 2025 11:30 AM
To: Liwen Chu <liwen.chu@xxxxxxx>
Cc: STDS-802-11-TGBN@xxxxxxxxxxxxxxxxx
Subject: [EXT] Re: [STDS-802-11-TGBN] 11-25/669 ---- CC50 MAC CIDs for DPS
|
Caution: This is an external email. Please take care when clicking links or opening attachments. When in doubt, report the message using the 'Report this email' button
|
Hi Liwen
Thanks for sharing the PDT.
Attached are clarification comments that I shared with you offline too. Request to address them.
1. Clarify Comment ID # 2418 status that it is revised. I see it in the list, but in the table of comment IDs, the Resolution is not updated.
2. Regarding: adding Default Mode field in DPS Operation Parameters field.
Suggest to define Default mode = 0 implies Parameterized mode and modify the statement for better clarity:
“. If the Default Mode field is equal to 1, the LC Mode Bandwidth, LC Mode Nss, and LC Mode MCS fields are reserved and
ICF Required field is either equal to 0 or equal to 1. If the Default Mode field is equal to 0, it indicates Parameterized mode of operation with LC Mode Bandwidth, LC Mode NSS and LC Mode MCS Field as defined below:”
Another better alternative is to use Parameterized mode instead of Default mode (as it looks counter intuitive to define a field for already what is default,instead we
can indicate that it is Parameterized mode field and when that is set to 0, it means it is going to be default)
|
Hi all,
I made the following changes per the comments received in ad hoc meeting:
1, adding Default Mode field in
DPS Operation Parameters field.
2, adding resolution of CID 2131.
3, ICF selection rules with/without DUO under DPS.
If you have comments, please let me know.
Best Regards,
Liwen
To unsubscribe from the STDS-802-11-TGBN list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
To unsubscribe from the STDS-802-11-TGBN list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBN&A=1
|