[STDS-802-11-TGBP] 回复: [STDS-802-11-TGBP] : SP request

[亓?男 <00001e2bb50f6a93-dmarc-request@xxxxxxxxxxxxxxxxx>]

Hi Bo,

 

Sorry I forget the reference. Plz see the update below.

 

Br,

 

Yinan

 

发件人: 亓?男 <00001e2bb50f6a93-dmarc-request@xxxxxxxxxxxxxxxxx>
发送时间: 2025年11月12日 9:36
收件人: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
主题: [STDS-802-11-TGBP] : SP request

 

Hi Bo,

 

May I request the below SPs to be added in the SP queue?

 

PDT SP

Do you agree to accept the proposed spec text in 11-25/2047r3 as part of IEEE P802.11bp D0.1, and grant the tech editor privilege to make editorial modification when incorporate  the proposed spec text to generate IEEE P802.11bp D0.1?

 

Tech SPs

SP1 (Deferred from Nov. Telco with update)

• Do you agree to capture the following text to TGbp SFD?
  • AMP non-AP STAs can indicate the following energy harvesting related parameter
    • 1 bit indication of whether or not the AMP non-AP STA supports RF signal energy harvesting from WPT signal.
    • When and how to do such indication are TBD.

[Reference: 11-25/2055r2, 11-25/1566r1]

 

SP2 (New SP)

• Do you agree to capture the following text to TGbp SFD?
  • The channelization agreed in motion #95 for China and motion #136 for EU in SFD 11-24/1613r14, and motion #1 for US (SP 4 in SFD PHY SP SET 8) in 11-25/1744r3 shall be applied to WPT.

[Reference: 11-25/2054r0, 11-25/1567r1]

 

SP3 (New SP)

• Do you agree to capture the following text to TGbp SFD?
  • Motion #80 is revised as follows.
    • Energizer may shall perform LBT before transmitting WPT signals in S1G, except when operating in frequency band only for RFID that doesn’t require LBT. The details of LBT are TBD.

[Reference: 11-25/2054r0]

 

SP4 (New SP)

• Do you agree to capture the following text to TGbp SFD?
  • Control information that is sent from the AMP AP to the AMP Energizer relating to the WPT waveform may include End Time for end of WPT transmission.

• Control information that is sent from the AMP AP to the AMP Energizer relating to the WPT waveform may include reconfiguration of WPT related parameters, e.g., interval/duration reconfigured as 0, to end WPT transmission.

[Reference: 11-25/2055r2, 11-25/1566r1]

 

Thanks.

 

Best regards,

Yinan

 

---

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1

---

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1