Re: [STDS-802-11-TGBP] November F2F SPs

[sun.bo1@xxxxxxxxxxxxxxxx]

Hello, Amichai,

Your SP3 is not a SFD SP.  You need to prepare a PDT to propose a modification to the spec text.

Best Regards,

Bo

Original

From：AmichaiSanderovich <00003126a116a6ee-dmarc-request@xxxxxxxxxxxxxxxxx>;

To：stds-802-11-tgbp <STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx>;

Date：2025-11-12 16:23:06

Subject：[STDS-802-11-TGBP] November F2F SPs

Hello Bo,

 

Please help to add the following SP to the PDT queue: 

 

SP 1:

Do you agree to incorporate the proposed draft text in document 11-25/2137r2 into the next version of the 11bp draft?

Please help to add the following SPs to the SFD queue (PHY):

SP1:

 Do you agree to add into the SFD data scrambling for active transmitter AMP STA:

1. For UL only
2. For UL+DL
3. None

SP2:

Do you agree to add into the SFD the following:

For data scrambling in active transmitter AMP STA UL and DL, use the same scrambling as applied in section 16.2.4 in 80211-2024

1)Yes

2)No

SP3:

Do you agree to instruct the editor to change D0.1 as follows:

“For all the data rates and/or MCSs that are defined for the active Tx non-AP AMP STA in 2.4GHz, the transmitter chip clock frequency tolerance of the active Tx non-AP AMP STA shall be ± 10⁴ ppm.â€?

 

1)Yes

2)No

Thank you!

Best Regards

Amichai

---

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1

---

To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1