Hi Bo,
Can you please update the following SPs:
SP MAC SP Set #2
SP1
(updated)
- Do you agree to add the following text to the 11bp SFD?
-
802.11bp defines an AMP SP Advertisement frame (SP Advert frame for short) that an AMP AP transmits to advertise the AMP Service Period parameters.
-
The SP Advert frame shall be the only frame that carries the AMP Service Period parameters.
This frame replaces the AMP
Trigger frame in FM-8.
-
Note:The AMP Service Period parameters are optionally present in the SP Advert frame. -
Note: The AMP STAs that do not support service period operation do not need to decode this frame.
[Reference: 11-25/0039r0, 11-25/0285r1, 11-25/0787r0, 11-25/1244r0, 11-25/1560r0]
SFD MAC SP Set #8
SP2
(updated)
- Do you agree to add the following text to the 11bp SFD?
-
IEEE 802.11bp defines the Operation Status field, to carry the transmission time that the non-AP AMP STA can sustain. The Operation Status field shall be carried in the UL frame transmitted in response to a request
for the Operation Status from the AMP AP, and may be an unsolicited transmission in response to a unicast AMP Trigger from the AMP AP otherwise.
-
Note: The non-AP AMP STAs that cannot
support the reporting of the transmission time it can sustain, are not required to respond to a request for Operation status from the AMP AP.
[Reference:
11-25/0788r0, 11-25/1243r0, 11-25/2038r0]
Kind Regards
Ian
From: Rojan Chitrakar <00002005fb56ded7-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Thursday, 13 November 2025 10:50 am
To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBP] SP request
Hi Bo,
Can I request that the latest SP deck (1692r8) be uploaded to mentor so that we can review the upcoming SPs in advance?
Thanks.
Best Regards,
Rojan Chitrakar
From: liulumin <00004bd3b1d2f01a-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Thursday, November 13, 2025 8:34 AM
To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
Subject: Re: [STDS-802-11-TGBP] SP request
Hi Bo,
Could you please add the following
new SFD SP to the PHY que?
-
Do you agree to add the following content to TGbp SFD:
Ø
For Bi-static backscatter operation, the center frequency of the backscattered signal shall be shifted up or down from the DL excitation frequency
with a fixed absolute value.
Ø
Note: The fixed absolute value is TBD.
[Ref: 25/2056r0]
Thanks!
Best
Lumin
From: qianbin (G) <000026f90ace5529-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Thursday, November 13, 2025 8:30 AM
To: STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-11-TGBP] 答复: SP request
Hi Bo,
Could you please add the following
NEW SPs to the queue? I appreciate if my SPs could be run in the PM1 session.
SFD SP:
-
Do you agree to add following content to TGbp SFD:
Ø
For each input bit of the AMP-Data field of AMP DL PPDU, the ratio between the averaged power of the On Symbol and the averaged power of the Off Symbol of the transmit signal shall be at least 20 dB
[Reference: 11-25/2052r0]
PDT SP:
n
Do you agree to incorporate the proposed draft text in document 11-25/2017r2 into the next version of the 11bp draft, and
grant the TGbp editor privilege to make editorial modification when incorporating the proposed text?
Best Regards
Bin
发件人: lipanpan (D) <00002fa7231ab79a-dmarc-request@xxxxxxxxxxxxxxxxx>
发送时间: 2025年11月13日
8:19
收件人:
STDS-802-11-TGBP@xxxxxxxxxxxxxxxxx
主题: [STDS-802-11-TGBP] SP request
Hi Bo,
Could you please help add following two
SFD SPs to queue?
SP 1:
o
11bp shall adopt the following channelization scheme for EU:
§
Bands: 915-921MHz
§
BW: 400kHz
§
Channel center frequency (MHz): 915.5, 915.9, 916.3, 919.5, 919.9, 920.3, 920.7
Reference: 11-25-2059-00
SP 2:
-
Do you agree to add the following text to TG bp SFD?
o
11bp defines two PPDU variants of the AMP DL PPDU for monostatic backscattering operation in sub-1GHz
§
PPDU subtype 1 consists of an Excitation field, an AMP SYNC field, and an AMP Data field and an Excitation field
§
PPDU subtype 2 consists of an AMP SYNC field, and an AMP Data field and an Excitation field
Reference: 11-25-1225-00, 11-25-1558-00, 11-25-1232-00
To unsubscribe from the STDS-802-11-TGBP list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1
To unsubscribe from the STDS-802-11-TGBP list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1
To unsubscribe from the STDS-802-11-TGBP list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1
To unsubscribe from the STDS-802-11-TGBP list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1
To unsubscribe from the STDS-802-11-TGBP list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGBP&A=1