Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[STDS-802-11-TGM] Updated REVme EDITOR1 ad hoc comment spreadsheet 21/0738r4



--- This message came from the IEEE 802.11 Task Group M Technical Reflector ---

Hello Mike and All,

 

EDITOR1 ad hoc comment spreadsheet have been uploaded, see:  https://mentor.ieee.org/802.11/dcn/21/11-21-0738-04-000m-revme-wg-cc35-editor1-ad-hoc-comments.xlsx

 

 

The following resolutions, from the MOTION-EDITOR1-C tab, are due to be motioned during today’s TGme session.

 

346

1673.00

9.7

V

It's a bit weird to have a dedicated subclause 9.7.2 MPDU delimiter CRC field.  If anything, it should be a subclause of 9.7.1 A-MPDU format, and there should be one for the MPDU delimiter MPDU Length field too

As it says in the comment

REVISED (ED1: 2021-06-27 22:41:04Z)

At 1673.55 delete the subclause title: “9.7.2 MPDU delimiter CRC field”

At 1673.11, 1672.51, delete: “(see 9.7.2 (11MPDU delimiter CRC field)”

427

1679.00

9.8.3.1

V

"-- The 3 LSBs of the TID as defined in 9.2.4.5.2 (TID subfield) for PV1 QoS Data frames (Type field equal to 0 and 3) transmitted by a QoS STA.
-- The Subtype for PV1 Control frames (Type subfield equal to 2) as described in 9.8.4 (PV1 Control frames).
-- The Subtype for PV1 Management frames (Type subfield equal to 1) as described in 9.8.5 (PV1 Management frames)."-- is it a type or a subtype?  Or a field or a subfield?

As it says in the comment

REVISED (ED1: 2021-06-27 22:42:17Z)

At 1679.9 and 1679.12, change “Subtype” to “subtype”

At 1679.6, change “Type field”  to “Type subfield”.

 

 

Regards,

Emily


To unsubscribe from the STDS-802-11-TGM list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-11-TGM&A=1