[STDS-802-16] [MMR-AH-UM] suggested addition for Section 3.2 In-Building Coverage Usage Model
Hi All: Yair
and I would suggest to add the following paragraphs at the end of the Section
3.2 In-Building Coverage Usage Model.
"
In some cases, it may not be possible or practical to place RSs near
windows facing the donor BS. Another approach would be to deploy a split RS
model. In the split RS model, the
RS would be split into two physical parts, one residing outdoors and the other
indoors. The outdoor unit (also
called upstream unit) and the indoor unit (also called downstream unit)
connected through some physical cabling such as an Ethernet link over CAT-5. The
outdoor unit communicating with the BS is located on a roof or other outdoor
location while the indoor unit servicing the building is located
indoors.
In
a large building, it may be required to have a single outdoor unit but multiple
indoor units (e.g. one on each floor). In this case, the “split RS” model will
need to be extended to address the configuration of a single upstream unit
connected to multiple downstream units.
"
DJ Shyy