Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: [RPRWG] RE: [IPORPR] payload length and padding and stuff




Nader,

There are actually two different layers here. 

802.3 MACs and PHYs MUST support a max frame length of 1522. You may find implementations that are both standard compliant and support jumbo sizes as proprietary extensions.

I think that 802.1 bridges do not have such a limitation within the standard. As you mention, they can be configured to support larger frame sizes. Actually some of the non-Ethernet 802 technologies already support larger frame sizes.

Dan


> -----Original Message-----
> From: Nader Vijeh [mailto:nader@xxxxxxxxxxxxxx]
> Sent: Wednesday, December 04, 2002 6:10 PM
> To: Romascanu, Dan (Dan)
> Cc: iporpr@xxxxxxxx; stds-802-17@xxxxxxxx
> Subject: RE: [RPRWG] RE: [IPORPR] payload length and padding and stuff
> 
> 
> Dan,
> 
> Thank you for the correction. Jumbo frames are not supported 
> by the 802.3
> standard.
> There are Ethernet switches on the market that support jumbo 
> frames in a
> proprietary manner. Of course these will not interoperate 
> with standard
> compliant 802.1 bridges. As I pointed out in the rest of the 
> message, even
> if jumbo frames are supported, max frame size "needs to be 
> configurable to
> be lower, in order to comply with transparent bridging requirements".
> 
> Nader
> 
> -----Original Message-----
> From: Romascanu, Dan (Dan) [mailto:dromasca@xxxxxxxxx]
> Sent: Wednesday, December 04, 2002 12:45 AM
> To: Nader Vijeh; Necdet Uzun; Anoop Ghanwani
> Cc: Frank Kastenholz; iporpr@xxxxxxxx; stds-802-17@xxxxxxxx
> Subject: RE: [RPRWG] RE: [IPORPR] payload length and padding and stuff
> 
> 
> > 
> > The max frame size may be extended beyond 802.3 1522 bytes 
> > limit as there is
> > precedence in 802.3 community.
> 
> Nader,
> 
> I am not sure what you exactly mean. If you refer to what is 
> popularly known
> as 'Jumbo frames', they are not supported by the IEEE 802.3 
> standards. 
> 
> Dan
>