Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_100GNGOPTX] SMF Ad Hoc and MMF Ad Hoc rescheduled



Jonathan

In regard to statement given in your presentation, I like to add some more color to this statement
Note: recent work on MPN treatment, by David Cunningham, shown in T11 (Fibre Channel), indicates that FEC is a necessity for 100m links

32GFC operates at 28.05 GBd, current spreadsheet model do show very steep increase in penalty as result of mode partition noise and cross terms.
The FC group wants to support 100 m on OM4 fiber, with current noise model even with a simple FFE EQ FEC would be required to close the link
budget.  Also the same spreadsheet shows that if we added FEC with overhead and operated at 28 GBd instead of 25.78 with 2.5 dBo or 5 dBe penalty 
we could be worse off than using FEC.  So our only option would be to use inband FEC which has higher latency.

With 100GNGOPTX investigating 2nd generation set of PMD where there already exist set of solution, as a group we have to deliver a solution 
which allow seamless migration from 40G-SR4 and is lower cost than 100G-SR10.   If it requires fundamental investigation then the group need
to undertake it!

My concern with current spreadsheet model which I have also shared with David Cunningham is how B (bandwidth) is used for calculation of MPN,
for mode partition noise and the cross term for detail analysis please see David presentation 

B= 1/(T-DCD) where T is the 1/Baudrate 

β=π.B.D.L.σλ

σmpn = kOMA/√2 . [1 - e^(-β^2)]

I do agree in the ISI calculation we should use DCD to increase the effective baudrate but if 
you have slow laser which is the case for 25.78 operation both ISI and MPN do not increase 
the laser is toggling faster but never reaches steady state!  The spreadsheet already captures 
the ISI penalty and double counting might have been negligible at lower speed when the 
laser were fast but double counting at these speed breaks the link or we end up with a link 
significantly shorter!

What seems reasonable here is to use the current B for ISI penalty calculation but for MPN and Cross
use the following 
B1= 0.35/(Teff)
where Teff is the RMS mean of sqrt(Trise^2+Tfall^2/2) as I expect current Ts is in the spreadsheet 
is the Tfall time.

Thanks,
Ali


On Feb 13, 2012, at 5:52 PM, Jonathan King wrote:

Dear all,
Here is my presentation for the MMF ad hoc call , 14th Feb 2012
This is intended to be an introduction to, and framework for, discussion on what we do as an ad hoc to progress towards an MMF objective.
Best wishes
jonathan
 
 
From: Anslow, Peter [mailto:panslow@xxxxxxxxx] 
Sent: Friday, February 10, 2012 3:48 PM
To: STDS-802-3-100GNGOPTX@xxxxxxxxxxxxxxxxx
Subject: [802.3_100GNGOPTX] SMF Ad Hoc and MMF Ad Hoc rescheduled
 
Hi,
 
By popular request, we have moved this meeting to Tuesday 14 February at the same time as before. (With apologies to Paul who now can’t attend.)
 
Hi,
 
As mentioned by Dan, Jonathan and I are planning to hold an SMF Ad Hoc meeting immediately followed by an MMF Ad Hoc meeting (1 hour each) starting at 8:00 am Pacific on Tuesday 14February.
 
Peter Anslow from Ciena has invited you to join a meeting on the Web, using WebEx. Please join the meeting 5-10 minutes early so we may begin on time. 

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
Topic: "SMF Ad Hoc followed by MMF Ad Hoc" 

Date & Time: Tuesday, 14 February 2012 at 16:00, GMT Time (London, GMT) 

To join web meeting click here: https://ciena.webex.com/ciena/j.php?ED=136397587&UID=0&PW=NZGZiMTQ2OTgw&RT=MTgjMjE%3D 

Meeting password: IEEE (please note passwords are case sensitive) 

Teleconference: Call-in number: +44-203-4333547  (United Kingdom) 
Conference Code: 207 012 5535 

Meeting number: 681 000 052 

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 

Additional Notes: 

- To add this meeting to your calendar program click the following link, or copy the link and paste it into your Web browser: https://ciena.webex.com/ciena/j.php?ED=136397587&UID=0&ICS=MI&LD=1&RD=18&ST=1&SHA2=amYBeqds-4oJeKBgc6O4QfHGLLIvaO7ruJQoBj-3bY0=&RT=MTgjMjE%3D 

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Australia, Brisbane :        0730870163
Australia, Melbourne :   0383380011
Australia, Sydney :           0282386454
Austria, Vienna :               01253021727
Belgium, Brussels :          028948259
Bulgaria, Sofia : 024917751
Canada, All Cities :           2064450056
China, All Cities Domestic :           8008706896
China, All Cities Domestic :           4006920013
Czech Republic, Prague :               228882153
Denmark, Copenhagen :               32727639
Estonia, Tallinn :                6682564
Finland, Helsinki :             0923193023
France, Paris :    0170375518
Germany, Berlin :             03030013082
Germany, Frankfurt :     06924437355
Hong Kong, Hong Kong :               85230730462
Hungary, Budapest :       017789269
India, Bangalore :             08039418300
India, Chennai - Primary :             04430062138
India, Mumbai :                02239455533
India, New Delhi :            01139418310
Ireland, Dublin :                015269460
Israel, Tel Aviv : 37630760
Italy, Milan :       0200661900
Japan, Tokyo :   0345808383
Korea (South), All Cities :              0264903634
Latvia, Riga :       66013622
Lithuania, Vilnius :            52055461
Luxembourg, Luxembourg :        20881245
Malaysia, Kuala Lumpur :              0348190063
Netherlands, Amsterdam :          0207946527
New Zealand, Auckland :              099291734
Norway, Oslo :  21033950
Poland, Warsaw :             223070121
Romania, Bucharest :     318144966
Russian Federation, Moscow :   4992701688
Singapore, All Cities :      6568829970
Slovak Republic, Bratislava :         0233418490
Slovenia, Ljubljana :        016003971
Spain, Barcelona :            935452633
Spain, Madrid :  911146624
Sweden, Stockholm :     0850512711
Switzerland, Bellinzona :               0912611463
United Kingdom, All Cities :         08443386571
United Kingdom, All Cities :         02034333547
United States, All Cities :               4438636577
Vietnam, Ho Chi Minh : 84838012419
 
Regards,
Pete Anslow | Senior Standards Advisor
43-51 Worship Street | London, EC2A 2DX, UK
Direct +44 2070 125535 
|
 
From: Daniel Dove [mailto:ddove@xxxxxxx] 
Sent: 09 February 2012 17:37
To: STDS-802-3-100GNGOPTX@xxxxxxxxxxxxxxxxx
Subject: Re: [802.3_100GNGOPTX] SG Phase - Critters and Objectives
 

John, Steve;

Thanks for this contribution to the forward progress of the Study Group.

I would like to ask that our participants take the time to open the links below and refresh themselves on these points.

In my experience, the tendency for a Study Group to get distracted is not new, and the need to continually remind ourselves of where we are in the process is essential.

I would add that each project has its own unique characteristics and therefore the process provides boundaries but the path will always be slightly different. Given that we (100G Ethernet) have optical PMDs which already exist and satisfy broad market potential, it changes the relative importance of the 5 criteria responses. We are not just comparing ourselves to prior speeds or other media types, but to 100G PMDs that are currently available. We need to be distinct, economically feasible against those alternatives in order to meet the needs of a broad market, and demonstrate we are technically feasible as well.

Your advice is appreciated and we should all be diligent to remain within the process boundaries and seek a path that brings us to a successful PAR and 5 criteria response. In that regard, focus on the process is essential. 

Jonathan and Pete are in the process of setting up a co-joined adhoc meeting that will address objectives and 5C responses for both the MMF and SMF technologies. We hope to provide that focus, and define a path for forward progress.

Best Regards,

Dan

<MMF-objective-Next-Steps.pptx>