[802.3_GT50GBIDI] FW: Invitation to participate in Standards Association Ballot of IEEE P802.3dk Greater than 50 Gb/s Bidirectional Optical Access PHYs

[Yuanqiu Luo <yuanqiu.luo@xxxxxxxxxxxxx>]

Dear Members,

I would like to invite you to participate in the Standards Association Ballot for IEEE P802.3dk. Please refer to the instructions in the email below from David.

Best regards,
Yuanqiu

-----Original Message-----
From: Law, David <0000363ca596b6f2-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Wednesday, July 23, 2025 8:31 AM
To: STDS-802-3@xxxxxxxxxxxxxxxxx
Subject: [STDS-802-3] Invitation to participate in Standards Association Ballot of IEEE P802.3dk Greater than 50 Gb/s Bidirectional Optical Access PHYs

Dear Colleagues,

Draft standards within the IEEE 802.3 Ethernet Working Group pass through two balloting cycles, first through IEEE 802.3 Working Group Ballot, then through Standards Association Ballot. If you wish to take part in the Standards Association Ballot of the IEEE P802.3dk Greater than 50 Gb/s Bidirectional Optical Access PHYs draft, please follow the instructions found below. Please note that you must join the ballot group by 17-August-2025 AoE (23:59 UTC -12).

If you have any questions, please contact me.

Best regards,
   David Law
   Chair, IEEE 802.3 Ethernet Working Group
   Phone: +44 1631 563729
   Email: david_law@xxxxxxxx


ENROLMENT INSTRUCTIONS
----------------------

To participate, you must have access to myProject through an IEEE Web Account <https://www.ieee.org/about/help/my-account/web-account.html>. This is the same IEEE Web Account you would use to access the IEEE attendance tool.

If you are an IEEE Standards Association (IEEE-SA) member:

Follow this process:
1. Log onto myProject; click the link: <https://development.standards.ieee.org/myproject-web/app#>.
2. Click on "Menu" in the top right; click on "Invitations/Ballots"; click on the "Open Invitations Panel" <https://development.standards.ieee.org/myproject-web/app#ballots>.
3. Scroll down until you find IEEE P802.3dk (if you cannot see IEEE P802.3dk please click the 'All Invitations' button); click on the "Join Ballot Group" icon under the heading "Ballot Invitations".
4. Click "Join The Ballot"; enter your affiliation(s); click "Select Classification"; confirm your affiliation(s); select your classification category and click "Submit". You will receive an on-screen confirmation that you successfully joined the group.

If you are not an IEEE-SA Member:

You can either enrol in this single ballot by paying a per-ballot fee or you can join the IEEE-SA by choosing one of the three options below. Joining the IEEE-SA entitles you to participate in as many Standards Association ballots as you like for the year.

OPTION 1 - Add IEEE-SA membership to existing IEEE Membership OPTION 2 - Join as both IEEE and IEEE-SA member.
OPTION 3 - Join as an IEEE-SA Member only.

For more information go to: <https://www.ieee.org/membership-catalog/productdetail/showProductDetailPage.html?product=MEMSTDIND>

If you are interested in paying a per-ballot fee, please contact Jennifer Santulli <j.santulli@xxxxxxxx> or Jodi Haasz <j.haasz@xxxxxxxx> as soon as possible.


OBLIGATIONS AND RESPONSIBILITIES OF BALLOTERS
---------------------------------------------

Once the document is ready to be balloted, you will receive a notification via email. You will typically have 30 days to review the document and return the ballot with your vote. By agreeing to participate in this ballot you have an *obligation* to respond. Failure to return a completed ballot may disqualify you from participating in future ballots.

________________________________________________________________________
To unsubscribe from the STDS-802-3 list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3&A=1

________________________________________________________________________
To unsubscribe from the STDS-802-3-GT50GBIDI list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-GT50GBIDI&A=1