This is to provide updated/additional suggested remedies for some of the comments (#84, #85, #115 and #41).
Suggested response for comment #84 and #115 is:
For registers 1.2309-1.2317 update the footnote <super>a</super> for those:
"<super>a</super> In addition to the MultiGBASE-T1 PHY family, this register applies to the MultiG+100M/100M+MultiGBASE-T1/V1, MultiGBASE-AT1, and MultiGBASE-AV1 PHY families."
Suggested response for comment #85 is:
For registers 1.2318-1.2320 add footnote <super>b</super> and put the following footnote below the table:
"<super>b</super>This register applies to both MultiGBASE-AT1 and MultiGBASE-AV1 PHY types."
Additional suggested response for comment #41:
An issue with the pcs_status description exists also in 192.3.6.1 that pcs_status is given the value of TRUE, but allowed values are OK/NOT_OK in 192.2.1.5.1.
This is additional to any changes for Clause 191, and may be further aligned in later discussion.
Update the description of pcs_status in 192.3.6.1 on P238L9 by changing:
Indicates whether the PCS is in a fully operational state. It is only TRUE if
To:
Indicates the value of the pcs_status parameter defined in 192.2.1.5.1. pcs_status has a value of OK only if
Thanks
Scott
From: Scott Muma <00003414ca8b162c-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Wednesday, September 2, 2026 5:20 PM
To: STDS-802-3-ISAAC@xxxxxxxxxxxxxxxxx
Subject: [802.3_ISAAC] EZ bucket pulls
EXTERNAL EMAIL:
Do not click links or open attachments unless you know the content is safe
Please pull comments #85 and #115 for discussion together. The proposed wording in #85 is not consistent with #84 for 1.2309-1.2317 as suggested by #115 so may cause some confusion.
Please pull #99 for further discussion. The remedy wording is not consistent with tx_mode/SEND_Z wording used elsewhere and I was not able to follow other parts of the new wording.
---
Scott Muma
Associate Fellow – Architecture
Communications Business Unit
Microchip Technology, Inc.
Email: scott.muma@xxxxxxxxxxxxx
To unsubscribe from the STDS-802-3-ISAAC list, click the following link:
https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-ISAAC&A=1
To unsubscribe from the STDS-802-3-ISAAC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-ISAAC&A=1