CONTENTS of *.zip file OM2_MC50_3X_tau1300_1_5Kb.zip
John Abbott 11/01/2005
** INTRODUCTION***************
There are two 1300nm data files on the IEEE site.
This one OM2_MC50_3X_tau1300_1_5Kb.zip has a 5000 mode delay set constructed
to match the OM2 overfilled BW distribution using the OM1 delay set. The reason
to use this data set is as a check against any biases entering the data set in
the process of "augmenting" the set below.
The other OM2_MC50_3X_tau1300_6_5Kb.zip has a DIFFERENT 5000 mode delay set
constructed by augmenting the transformed OM1 data set by a factor of 6x to
30,000 sets before selecting 5000 actual fibers and determing the best match
to the OFL BWs.
****************************
*******References************
1. JSA presentation abbott_1_0705.pdf at IEEE802.3aq LRM meeting July 2005
http://www.ieee802.org/3/aq/public/jul05/abbott_1_0705.pdf
2. JSA presentation summarizing this data set
Abbott_OM2_revision_11_2005.pdf
included in this *.zip file.
*******************************
CONTENTS of *.zip file OM2_MC50_3X_tau1300_1_5Kb.zip
1. READ_ME_FIRST_STEP2_OM2_1300.txt
This file (contents & explanation)
See the References above for an introduction.
2. OM2_MC50_3X_tau1300_1_5Kb.dat
5000 mode delays at 1300nm for installed base OM2 modeling (50um 500/500)
creating using set of 5,000 test fibers shifted from OM1 mode delay set.
This data set has the mode delays.
It needs to be used with the
mode power distribution for the lasers/launch conditions being modeled.
We are assuming that only the first 10 groups be given significant power, and
that the outer two are considered attenuated.
These mode delays approximate a manufacturing distribution, just as was done
for the TIA simulations of OM3 fiber (850nm 10GbE 300m) described in
JLT Vol. 21 May 2003 pp.1256-1275, and pp.1242-55.
THE DISTRIBUTION INCLUDES FIBERS WHICH DO NOT MEET THE 500/500 SPEC and needs
to be truncated using the data in file (3.) just below.
3. OM2_Step2_OFLBW_summary.dat
Set of OFL1300 and 16um offset BWs corresponding to installed base OM2 model
This data set is used to truncate the modeling results so that only fibers
meeting the OFL 500/500 requirement are included.
4. PXG_50um_1300_26_12.dat
Set mode power distributions for gaussian beams launched into 1% Delta 50um
core radius fibers at 1um intervals from 0um to 25um. 26_12 refers to 26
radial positions and 12 mode groups supplied.
5. OM2_MC50_1_BW_16umP.dat
1300nm OFL BW and 16um offset BW for comparison & reference purposes.
6. OM2_MC50_1_BW_10umP.dat
1300nm OFL BW and 10um offset BW for comparison & reference purposes.
7. Abbott_OM2_revision_11_2005.pdf
Presentation on this data set (in REFERENCE list at top of this file).
Includes scatter plots of OFL850 vs OFL1300 and the cumulative probability
distributions.
Please sent questions/comments to
John Abbott
Corning Incorporated
abbottjs@corning.com