I’m forwarding this notice as the new My Project system seems to have issues with ballot announcements. If you are a member of the SA ballot pool, this is the notification that the recirculation is open and that comments and votes will now be accepted. If you are not a member of the ballot group, we will send out the Chair's Standard Offer letter soon with instruction on how to submit non-binding comments.
Steven B. Carlson
Chair, P802.3ch Multi-Gig Automotive Ethernet PHY Task Force
Chair, Beyond 10 Gb/s Automotive Electrical PHYs Study Group
Executive Secretary, IEEE 802.3 Ethernet Working Group
High Speed Design, Inc.
---------- MESSAGE BODY ---------
Dear IEEE P802.3ch Balloting Group Member:
This e-mail is to advise you of the opening of a Recirculation Ballot for:
IEEE P802.3ch Standard for Ethernet Physical Layer Specifications and Management Parameters for Greater Than 1 Gb/s Automotive Ethernet
The recirculation will close on 14 Feb 2020. Log on to myProject to enter/update your vote and to comment.
***** MESSAGE FROM THE WORKING GROUP CHAIR *****
The IEEE P802.3ch/D3.1 Standard for Ethernet Physical Layer Specifications and Management Parameters for Greater Than 1 Gb/s Automotive Ethernet draft is an amendment to IEEE 802.3.
It has been written as an amendment to IEEE Std 802.3-2018 IEEE Standard for Ethernet as amended by IEEE Std 802.3cb-2018 IEEE Standard for Ethernet Amendment 1:Physical Layer Specifications and Management Parameters for 2.5 Gb/s and 5 Gb/s Operation over Backplane, IEEE Std 802.3bt-2018 IEEE Standard for Ethernet Amendment 2: Physical Layer and Management Parameters for Power over Ethernet over 4 pairs, IEEE Std 802.3cd-2018 IEEE Standard for Ethernet Amendment 3: Media Access Control Parameters for 50 Gb/s and Physical Layers and Management Parameters for 50 Gb/s, 100 Gb/s, and 200 Gb/s Operation, IEEE Std 802.3cn-2019 Standard for Ethernet Amendment 4: Physical Layers and Management Parameters for 50 Gb/s, 200 Gb/s, and 400 Gb/s Operation over Single-Mode Fiber, IEEE Std 802.3cg-2019 Standard for Ethernet Amendment 5: Physical Layer Specifications and Management Parameters for 10 Mb/s Operation and Associated Power Delivery over a Single Balanced Pair of Conductors, IEEE P802.3cq Draft Standard for Ethernet Amendment: Maintenance #13: Power over Ethernet over 2 pairs and IEEE P802.3cm Draft Standard for Ethernet Amendment Physical Layer and Management Parameters for 400 Gb/s over Multimode Fiber.
The Get802 program, accessible at the URL <http://ieeexplore.ieee.org/browse/standards/get-program/page/series?id=68>, contains IEEE Std 802.3-2018, IEEE Std 802.3cb-2018, IEEE Std 802.3bt-2018 and IEEE Std 802.3cd-2018. The Get802 program however does not yet contain IEEE Std 802.3cn-2019, IEEE Std 802.3cg-2019, IEEE P802.3cq or IEEE P802.3cm so if you would like a copy in order to review this draft, please send me an email at the address below.
The IEEE P802.3ch/D3.1 comment resolution meeting is planned to occur during the IEEE P802.3ch February 2020 contingent interim teleconference meeting. Meeting information is available at <http://www.ieee802.org/3/interims/index.html>.
Should you have any questions, please contact me at your earliest convenience.
David J. Law
Chair, IEEE 802.3
Should you have any questions, please contact standards-support@xxxxxxxx.
To unsubscribe from the STDS-802-3-NGAUTO list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-NGAUTO&A=1