Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802.3_100G-OPTX] Status update and proposed comment resolution order for 802.3cu Interim Teleconference - Tues 4/21



John,

 

Thanks for the feedback. We discussed on the call and we left that part of the text as is, although we made other changes to the proposed response based on input from Mike, basically to change “RINxx.xOMA” to “RINxOMA” throughout the draft, with editorial license.

 

Gary

 

From: John D'Ambrosia <jdambrosia@xxxxxxxxx>
Sent: Tuesday, April 21, 2020 10:03 AM
To: STDS-802-3-100G-OPTX@xxxxxxxxxxxxxxxxx
Subject: Re: [802.3_100G-OPTX] Status update and proposed comment resolution order for 802.3cu Interim Teleconference - Tues 4/21

 

Gary

Just did a quick check of the baseline 802.3 standard (2018)

 

Greater than has 490 instances

Exceeds 116

 

Point is both have been acceptable.

 

John

 

From: Gary Nicholl (gnicholl) <00000bb92642e11e-dmarc-request@xxxxxxxxxxxxxxxxx>
Sent: Tuesday, April 21, 2020 9:56 AM
To: STDS-802-3-100G-OPTX@xxxxxxxxxxxxxxxxx
Subject: Re: [802.3_100G-OPTX] Status update and proposed comment resolution order for 802.3cu Interim Teleconference - Tues 4/21

 

Thanks for the feedback Peter. Let’s review further on the call.

 

Gary

 

From: Peter Stassar <Peter.Stassar@xxxxxxxxxx>
Sent: Tuesday, April 21, 2020 6:07 AM
To: Gary Nicholl (gnicholl) <gnicholl@xxxxxxxxx>
Cc: STDS-802-3-100G-OPTX@xxxxxxxxxxxxxxxxx
Subject: RE: [802.3_100G-OPTX] Status update and proposed comment resolution order for 802.3cu Interim Teleconference - Tues 4/21

 

Hi Gary,

 

Thanks.

I do have a comment with respect to the wording in the response to comment #113.

 

It currently says:

“"With the Gaussian noise generator on and the sinusoidal jitter and sinusoidal interferer turned off, the RINxx.xOMA of the SRS test source (where xx.x is the value for optical return loss tolerance from Table 151-7) shall be no greater than the value specified in Table 151-7 for 400GBASE-FR4 and 400GBASE-LR4-6."

 

I don’t think the bit “shall be no greater than” is really appropriate wording.

What do you mean with a “great value”? A fabulous value?

 

Probably better to say:

“"With the Gaussian noise generator on and the sinusoidal jitter and sinusoidal interferer turned off, the RINxx.xOMA of the SRS test source (where xx.x is the value for optical return loss tolerance from Table 151-7) shall not be larger than the value specified in Table 151-7 for 400GBASE-FR4 and 400GBASE-LR4-6."

Or similar.

 

Kind regards,

 

Peter

 

From: Gary Nicholl (gnicholl) [mailto:00000bb92642e11e-dmarc-request@xxxxxxxxxxxxxxxxx]
Sent: Tuesday, April 21, 2020 12:24 AM
To: STDS-802-3-100G-OPTX@xxxxxxxxxxxxxxxxx
Subject: [802.3_100G-OPTX] Status update and proposed comment resolution order for 802.3cu Interim Teleconference - Tues 4/21

 

Please see below for the comment resolution order for tomorrow’s interim conference call (4/21).

 

I would appreciate it if the commenters (and ideally anyone with an interest/opinion on a specific topic) could review the proposed comment responses ( http://www.ieee802.org/3/cu/comments/index.html) ahead of the call tomorrow, and if you have any questions or concerns with the proposed response please contact the editorial team and/or send a message to the reflector.

 

We are down to the last 3 comments (excluding the bucket), so are expecting to be able to close comment resolution tomorrow.

 

Here is the link to the latest comment agenda slides (including the latest status update).

 

 

http://www.ieee802.org/3/cu/public/March20/nicholl_3cu_01a_042120.pdf

 

Thanks in advance,

 

Gary Nicholl

Chief Editor, IEEE 802.3cu Task Force

 

 


To unsubscribe from the STDS-802-3-100G-OPTX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100G-OPTX&A=1


To unsubscribe from the STDS-802-3-100G-OPTX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100G-OPTX&A=1


To unsubscribe from the STDS-802-3-100G-OPTX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100G-OPTX&A=1


To unsubscribe from the STDS-802-3-100G-OPTX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100G-OPTX&A=1