Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

[802.3_100G-OPTX] Reminder to Join SA-Ballot pool for IEEE 802.3cu



Dear Colleagues,

 

A reminder to join the SA-ballot pool if you wish for the next phase of the P802.3cu balloting process.  Details on joining below.

 

Deadline is next Thursday June 4th.

 

Regards,  Mark  

 

 

 

On 2020-05-07, 2:23 PM, "Mark Nowell (mnowell)" <00000b59be7040a9-dmarc-request@xxxxxxxxxxxxxxxxx> wrote:

 

    Dear Colleagues,

 

    In anticipation of our802.3cu's eventual move to SA Ballot phase we have begun the process of building up the Standards Association (SA) Ballot pool.

 

    For those not familiar with this phase, it is the 3rd review phase of the IEEE process.  In this phase, balloting and voting on the drafts (Usually D3.x) is open to anyone in the world to review.  This broadening of the pool of reviewers is intended to further improve the quality of the specification after is has been reviewed through the Task Force Review process and the Working Group Review process.

 

    The key thing about being part of the SA Ballot pool is you need to actually request to be part of it and the instructions on how to do that are below in the email that David Law sent to the Dialog reflector. 

 

    Once you are in the pool, you will receive notifications of the ballots and be able to submit "required" comments against the draft. If you do not participate in the SA ballot pool, we typically will still accept and review comments but can only commit to dealing with them on a best-case basis.

 

    Let me know if you have any questions.

 

    Regards,  Mark 

 

 

 

    On 2020-05-06, 11:48 PM, "Law, David" <dlaw@xxxxxxx> wrote:

 

        Dear colleagues,

 

        Draft standards within the IEEE 802.3 Ethernet Working Group pass through two balloting cycles, first through IEEE 802.3 Working Group Ballot, then through Standards Association Ballot. If you wish to take part in the Standards Association Ballot of the IEEE P802.3cu 100 Gb/s and 400 Gb/s over SMF at 100 Gb/s per Wavelength draft please follow the instructions found below. Please note that you have to join the ballot group by 4-June-2020, 23:59 AoE.

 

        If you have any questions, please contact me.

 

        Best regards,

           David Law

           Chair, IEEE 802.3 Ethernet Working Group

           Phone: +44 1631 563729

           Email: david_law@xxxxxxxx

 

 

        ENROLMENT INSTRUCTIONS

        ----------------------

 

        To participate, you must have access to myProject through an IEEE Web Account <https://www.ieee.org/about/help/my-account/web-account.html>. This is the same IEEE Web Account you would use to access the IEEE attendance tool.

 

        If you are an IEEE-SA member:

 

        Follow this process:

        1. Log onto myProject; click the link: <https://development.standards.ieee.org/myproject-web/app#>.

        2. Click on "Menu" in the top right; click on "Invitations/Ballots"; click on the "Open Invitations Panel" <https://development.standards.ieee.org/myproject-web/app#ballots>.

        3. Scroll down until you find IEEE P802.3cu (if you cannot see IEEE P802.3cu please click the 'All Invitations' button); click on the "Join Ballot Group" icon under the heading "Ballot Invitations".

        4. Click "Join The Ballot"; enter you affiliation(s); click "Select Classification"; confirm your affiliation(s); select your classification category, and click "Submit". You will receive an on-screen confirmation that you successfully joined the group.

 

        If you are not an IEEE SA Member:

 

        You can either enrol in a single ballot by paying a per-ballot fee or you can join the IEEE SA by choosing an option link below. Joining the IEEE SA entitles you to participate in as many Standards Association ballots as you like for the year.

 

        OPTION 1 - I am already an IEEE Member and I want to add Standards Association Membership. Go to: <http://www.ieee.org/membership_services/index.html>

        OPTION 2 - I am not an IEEE Member but would like to enroll in both IEEE and IEEE Standards Association. Go to: <http://www.ieee.org/membership_services/membership/join/index.html>.

        OPTION 3 - I am not interested in becoming an IEEE Member, however I would like to enroll as a Standards Association Member only. Go to: < https://standards.ieee.org/about/membership/index.html>

 

        If you are interested in paying a per ballot fee please contact <David_Law@xxxxxxxx> as soon as possible.

 

        OBLIGATIONS AND RESPONSIBILITIES OF BALLOTERS

        ---------------------------------------------

 

        Once the document is ready to be balloted, you will receive notification via email. You will typically have 30 days to review the document and return the ballot with your vote. By agreeing to participate in this ballot you have an *obligation* to respond. Failure to return a completed ballot may disqualify you from participating in future ballots.

 

        ________________________________________________________________________

        To unsubscribe from the STDS-802-3-DIALOG list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-DIALOG&A=1

 

 

    ________________________________________________________________________

    To unsubscribe from the STDS-802-3-100G-OPTX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100G-OPTX&A=1


To unsubscribe from the STDS-802-3-100G-OPTX list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-100G-OPTX&A=1