[802.3_B400G_ELEC] MMSE-based Equalizer Optimization for TDECQ
Attached please find two memos I wrote to describe MMSE tap optimization in
support of IEEE 802.3dj Draft 3.1 TDECQ calculation.
Filename: DFE Derivation Rev 1.1.pdf
Document title: MMSE Calculation of Reference Equalizer Taps for TDECQ
Date: Revised 7 July 2026
This document describes MMSE optimization of the equalizer taps. This
reflects unconstrained optimization of the taps, so the constraints of Table
180-16 are not imposed. An earlier version of this document was posted in
the meeting materials for the June 24th, 2026 Optical Ad Hoc at this
location:
https://www.ieee802.org/3/dj/public/adhoc/optics/0626_OPTX/swenson_3dj_adhoc
_02_260624.pdf . This version of the document corrects a numerical error
found in that version; the error appeared in the numerical values for the
autocorrelation matrix description in equation (18). My thanks to Hansel
D'Silva for validating the matrix and pointing out the error to me.
Filename: BT_filter_autocorrelation_matrix Rev. 1.2.pdf
Document title: Analytical Derivation: Noise Autocorrelation of a 4-Pole
Bessel-Thomson Filter
Date: Revised 6 July 2026
This document provides an analytic derivation of the autocorrelation
function of noise at the output of the BT filter. This version has numeric
values that reflect the same correction noted above (thank you, Hansel!)
I welcome comments, questions, and corrections.
Thank you,
Norm
________________________________________________________________________
To unsubscribe from the STDS-802-3-B400G-ELEC list, click the following link: https://listserv.ieee.org/cgi-bin/wa?SUBED1=STDS-802-3-B400G-ELEC&A=1