Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

RE: [802SEC] Re: Wireless LCD Projectors for use at July plenary at HR-SF

Hi everyone,

So I'll add one more opinion to the pile.  I think it is important that
we try new things and see how they work, especially if they are our own
technologies.  If we won't buy it, who will?  

I can see value for a projector with a wireless interface - where a guy
in the back of the room can quickly display their objection on the
screen, or where you might even be able to briefly split the screen
between two inputs for comparison.  But frankly, I am perplexed by the
software and control issues - another reason why I want to try it so I
can see first hand if it works or not.

Another area of personal concern for me is whether the RF environment in
our meetings can hack it.  I'm already not very happy with the
performance we get out of our current WLAN without a video load.
802.11e (QoS) is not out yet.  So, I can't wait to see what happens when
we add a video load in with our existing loads.  Will the WLAN be able
to handle the load?  Will other traffic in the area impact the quality
of the video on the projector?

I view IEEE 802 not just as a standards development organization, but a
as a potential test bed for our own technologies.  Actually, I wish we
did more testing and evaluation of the network we run here.  The one
thing I will caution is I'm not sure myself if an investment in the
projector will be worth while, so don't buy more than one.  I think it
is worth buying one though just to find out if it is worth while.


Matthew Sherman 
Vice Chair, IEEE 802 
Technology Consultant 
Communications Technology Research 
AT&T Labs - Shannon Laboratory 
Room B255, Building 103 
180 Park Avenue 
P.O. Box 971 
Florham Park, NJ 07932-0971 
Phone: +1 (973) 236-6925 
Fax: +1 (973) 360-5877 

-----Original Message-----
From: Howard Frazier [] 
Sent: Tuesday, July 01, 2003 2:08 PM
To: Rigsbee, Everett O
Cc:; 802 @F2F Dawn S;;
802 @F2F Jennifer Hull; 802 Bob Heile; Bob O'Hara; Paul Nikolich
(E-mail); 802 Roger B. Marks; 802 Stuart J. Kerry; Tim Godfrey; 802. 11
Al Petrick (802-11 Al Petrick); Don Berry; 802 Exec;
Subject: [802SEC] Re: Wireless LCD Projectors for use at July plenary at

Personally, I would not pay extra $ for a projector
with a wireless interface.  Based on bitter experience,
I never add software or hardware to my laptop while I
am traveling, so I loathe the idea of having to add
some new driver for this interface.

The time required to connect a cable to a projector
is minimal.  Time is occasionally wasted when a
presenter can't figure out how to toggle between
their laptop's LCD and the external monitor interface,
or when this simple action produces a "Microsoft Moment".
I can't see where adding a couple of layers of complexity
will improve the situation.  For large, busy groups that
need to save time, the best technique is to load all
of the presentation materials onto one laptop, thus
avoiding the need to switch connections.

In the five years that we have been buying projectors,
I have learned that "bells and whistles" like cameras
are pretty much useless. I would put a wireless interface
into the same category. It's just one more thing that
can break, requiring a potentially costly repair, and
taking a projector out of service.

Let's please stick with simple, durable, bright,
high-resolution DLP projectors with minimal bells and whistles.

Howard (Yes, I'm a Luddite, and proud of it) Frazier

Rigsbee, Everett O wrote:

> FYI-  I just happened to stumble across the Epson 735c Wireless LCD
Projector (see attached specification sheet) and thought this might just
be the thing for our future meetings, but wondered if anyone has had any
experience with this unit, and has opinions on its suitability for use
at IEEE 802 plenaries and interims.  
> It seems to be price competitive with the regular wired units, and
might allow a lot more flexibility in sharing an LCD projector amongst
several presenters.  
> Input and opinions on this notion are encouraged.  
> I'm working on seeing if we can get a couple of these units to use in
SF for evaluation purposes.  Any support for this from our Epson folks
would be seriously appreciated.   :-)  
> Thanx,  Buzz
> Dr. Everett O. (Buzz) Rigsbee
> Boeing - SSG
> PO Box 3707, M/S: 7M-FM
> Seattle, WA  98124-2207
> (425) 865-2443    Fx: (425) 865-6721