Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802SEC] Fwd: Re: Initiating a ballot invitation



Good point.

Regards,
Tony

At 02:04 22/03/2005, John Lemon wrote:
>Would we not also want all the WG vice chairs to be able to initiate
>ballots too?
>
>-----Original Message-----
>From: owner-stds-802-sec@LISTSERV.IEEE.ORG
>[mailto:owner-stds-802-sec@LISTSERV.IEEE.ORG]On Behalf Of Tony Jeffree
>Sent: Friday, March 18, 2005 11:52 AM
>To: STDS-802-SEC@LISTSERV.IEEE.ORG
>Subject: [802SEC] Fwd: Re: Initiating a ballot invitation
>
>
>Paul -
>
>See attached. If any of the WG chairs are to be in a position to properly
>use MyBallot, then you are going to have to set up the necessary
>authorizations.
>
>Regards,
>Tony
>
> >Envelope-to: tony@jeffree.co.uk
> >Reply-To: sa-ballot@ieee.org
> >Subject: Re: Initiating a ballot invitation
> >To: ANTHONY A JEFFREE <tony@jeffree.co.uk>
> >Cc:
> >X-Mailer: Lotus Notes Release 5.0.12   February 13, 2003
> >From: p.stanton@ieee.org
> >Date: Fri, 18 Mar 2005 14:46:57 -0500
> >X-MIMETrack: Serialize by Router on Buzz/US/IEEE(Release 5.0.12  |February
> >13, 2003) at
> >  03/18/2005 02:46:58 PM
> >
> >
> >Comments/Response to Case ID: 00661675
> >
> >ReplyTo: sa-ballot@ieee.org
> >
> >
> >       From: Penny Stanton                 Date:
> > 03/18/2005
> >
> >
> >
> >
> >
> >
> >    Subject: Re: Initiating a           Send To: ANTHONY A
> > JEFFREE
> >             ballot
> > invitation                   <tony@jeffree.co.uk>
> >
> >
> >                                             cc:
> >
> >
> >
> >
> >
> >
> >Mr. Jeffree:
> >
> >To initiate a ballot invitation, you need the link,  "Submit Invitation
> >Request."  If you do not see this link, it is because Mr. Nikolich has not
> >assigned you as a "Designee" for this project -- when he assigns you, you
> >will receive a confirmation email.  Then, when you log onto myBallot, the
> >system will recognize you as a designee and will give you access to the
> >Sponsor Control Panel containing the link, "Submit Invitation Request."
> >
> >Also, note that when you are assigned as a Designee, you will be provided
> >with two control panels when you log on to myBallot -- a "sponsor control
> >panel" and a "myBallot control panel."  Each control panel gives you
> >different views and contains access to different actions -- you simply
> >click on the link on one or the other on the control panel to toggle
> >between them.  When you are on the myBallot control panel, it is for your
> >use as a balloter (say, for example, you wanted to join a balloting group)
> >and thus you won't have access to submitting an invitation request since
> >balloters are not given that function.  To submit an invitation request
> >which is a sponsor/designee function, ensure that you are on the Sponsor
> >Control Panel to access the link for "Submit Invitation Request."
> >
> >Thank you.
> >
> >
> >
> >
> >
> >IEEE SA Balloting Center Staff
> >
> >==========ATTENTION myBallot is coming soon!=========================
> >The new IEEE-SA Balloting System is coming soon! Go to
> >http://standards.ieee.org/sa/ballotnews.html for more information.
> >
> >Hi -
> >
> >As Chair of 802.1 I need to initiate a ballot invitation but I cannot see
> >anywhere in MyBallot where I can do this. Can you tell me where to look
> >please?
> >
> >Regards,
> >Tony
>
>Regards,
>Tony
>
>----------
>This email is sent from the 802 Executive Committee email reflector.  This
>list is maintained by Listserv.

Regards,
Tony

----------
This email is sent from the 802 Executive Committee email reflector.  This list is maintained by Listserv.