Thread Links Date Links
Thread Prev Thread Next Thread Index Date Prev Date Next Date Index

Re: [802SEC] LMSC Policies and Procedures - Documentation Numbering



Bob/Stuart -

I must admit that this one snuck under my radar - when did we agree to this 
fascinating piece of text?

The one saving grace it has as far as I can tell is that *nobody* can 
currently be in conformance with it, due to the fact that the specification 
is ambiguous/broken for the non-draft ("Or") case.

When I mentioned document numbering schemes and software with my WG a 
plenary or so ago, I have to say that the level of enthusiasm was off the 
scale. I'm sure I can leave it to your imagination as to which end of the 
scale it was off.

Regards,
Tony

At 21:57 07/02/2006, Grow, Bob wrote:
>Stuart:
>
>IEEE 802.3 certainly qualifies as one of the "others" of whom you have
>"suspicions".
>
>I believe there is little support within 802.3 for the document
>numbering scheme, nor a perception that anything beyond a defined
>numbering plan for projects (and consequently standards) is required.  I
>would be happy to do a straw poll on Monday at my opening plenary
>meeting to more objectively determine the answers to the above or other
>related questions.
>
>--Bob Grow
>
>-----Original Message-----
>From: Stuart J. Kerry [mailto:stuart@OK-BRIT.COM]
>Sent: Tuesday, February 07, 2006 11:15 AM
>To: STDS-802-SEC@listserv.ieee.org
>Subject: [802SEC] LMSC Policies and Procedures - Documentation Numbering
>Importance: High
>
>
>Paul,
>
>In doing my normal reviewing of the various P&P's I asked my Vice-Chair
>(Harry Worstell) to confirm one issue area under the January 2006
>Revised
>LMSC Rules relating to "Documentation Numbering" in clause 19.
>
>Believing at first that the rule related to Drafts only, but on second
>review independently by myself and Harry we both came to the conclusion
>that
>it also related to WG's and TAGs. If this is truly the case then Harry
>has
>officially advised me that:
>
>"Please be advised that IEEE 802.11 is unable to meet the new IEEE 802
>LMSC
>Policies and Procedures dated January 2006 with respect to the new
>document
>numbering system until we acquire new software that can accommodate that
>numbering scheme".
>
>To verify the situation I asked Harry to further request an
>understanding of
>the rule from the LMSC 1st Vice-Chair responsible for rules (Mat
>Sherman)
>who has confirmed our understanding of the rule.
>
>With this situation we believe that we and others are in violation of
>said
>rule, and look to other WG and TAG Chairs to take notice of this fact
>and
>for them to independently review our suspicions.
>
>As suggested in Mat's last email may be the rule should relate only to
>Drafts as the original intention. But I ask you, that this is addressed
>urgently at the forthcoming March Plenary to everybodies satisfaction.
>
>Respectfully,
>
>Stuart
>
>   _____
>
>From: Sherman, Matthew J. (US SSA)
>[mailto:matthew.sherman@baesystems.com]
>Sent: Monday, February 06, 2006 8:04 PM
>To: hworstell@research.att.com
>Cc: stuart.kerry@philips.com; stuart@ok-brit.com; apetrick@widefi.com;
>paul.nikolich@ATT.NET
>Subject: RE: LMSC Policies and Procedures - Documentation Numbering
>
>
>
>Hi Harry,
>
>
>
>This has been a standing issue for me.  I recognize the 802.11 does not
>(and
>probably can't reasonably) follow this format.  I did once try
>(unsuccessfully) to change / clarify this section so as to make it more
>acceptable.  I would encourage someone (Stuart?) to propose a specific
>change correcting it in such a way as to allow 802.11 to comply with it.
>This could be a simple as to clarify that this numbering system only
>applies
>to Drafts.
>
>
>
>Hope the comments are helpful.
>
>
>
>Regards,
>
>
>
>Mat
>
>
>
>Matthew Sherman, Ph.D.
>Senior Member Technical Staff
>BAE SYSTEMS, CNIR
>Office: +1 973.633.6344
>email: matthew.sherman@baesystems.com
>
>   _____
>
>From: hworstell@research.att.com [mailto:hworstell@research.att.com]
>Sent: Monday, February 06, 2006 2:58 PM
>To: Sherman, Matthew J. (US SSA)
>Cc: stuart.kerry@philips.com; stuart@ok-brit.com; apetrick@widefi.com;
>paul.nikolich@ATT.NET
>Subject: LMSC Policies and Procedures - Documentation Numbering
>
>
>
>Hi Matthew,
>
>
>
>In looking over the January 4, 2006 issue of the LMSC Policies and
>Procedures, in
>
>Section 19 - IEEE LMCS Draft Numbering Plan, it appears to be presenting
>a
>numbering
>
>system for the working group documents "sc = an optional subcommittee
>designator to be
>
>used specifically for tracking subcommittee submissions that are
>independent
>of the Working
>
>Group/TAG as a whole. Documents relevant to the whole Working Group/TAG
>will
>use the
>
>802.n-yy/m form. The allowed formats for a subcommittee designator are:
>one
>letter, two letters,
>
>or one letter followed by one number. All other characters are
>specifically
>prohibited. "
>
>
>
>My question is are all working group documents other than drafts
>required to
>follow this numbering requirement?
>
>If so, this will be extremely difficult for the IEEE 802.11 Working
>Group to
>comply
>
>with.
>
>
>
>Best regards,
>
>
>
>Harry Worstell
>
>
>
>19. IEEE LMSC Draft Numbering Plan
>
>This numbering scheme applies to all LMSC Working Groups and TAGs.
>
>It covers all IEEE 802 Drafts.
>
>LMSC POLICIES AND PROCEDURES REVISED PAGE 39 OF 42 FILE:
>LMSC_P&P_NOVEMBER_2005_R051204.DOC
>
>The format for the document numbers will be as follows:
>
>Either P802.na-Di (formal draft standards)
>
>Or P802.n{sc} (all other documents & correspondence)
>
>Where:
>
>n = a Working Group/TAG Designator (i.e. 0, 1, ...),
>
>                     a = a PAR Series Designator (i.e. _, A, B, C,...)
>for
>drafts of a document produced under an active
>
>                     PAR, and must include the {/Di} field,
>
>i = a Draft Revision Number for working documents produced under an
>active
>PAR. Digits for the number may be separated by '-' but should not use
>any
>other separators.
>
>yy = a year designator (i.e. 87, 88, 89, ...) to indicate the year in
>which
>the document number was assigned,
>
>m = a sequence number which starts at 1 at the beginning of each year
>and is
>increased by 1 each time a document number is assigned,
>
>sc = an optional subcommittee designator to be used specifically for
>tracking subcommittee submissions
>
>that are independent of the Working Group/TAG as a whole. Documents
>relevant
>to the whole Working Group/TAG
>
>will use the 802.n-yy/m form. The allowed formats for a subcommittee
>designator are: one letter, two letters, or one
>
>letter followed by one number. All other characters are specifically
>prohibited.
>
>With the exception of the grandfathered 802.1 numbering scheme, IEEE 802
>draft standards documents
>
>shall follow the numbering protocols outlined in the IEEE Standards
>Style
>Manual. One approved exception
>
>to these stated policies is that the numbering of draft standards
>amendments
>that convert to a revision
>
>project shall contain the phrase "-REV" preceding the alphabetical
>designation of the project.
>
>Harry R. Worstell
>Sr. Technical Specialist
>Communications Technology Research
>AT&T Labs - Shannon Laboratory
>Vice Chair, IEEE 802.11 Working Group
>Room B233, Building 103
>180 Park Avenue
>P.O. Box 971
>Florham Park, NJ 07932-0971
>Phone: +1 (973) 236-6915
>Cell  +1(973) 727-5564
>Fax: +1 (973) 360-5873
>EMAIL: hworstell@research.att.com
>
>
>
>
>   _____
>
>
>From: hworstell@research.att.com [mailto:hworstell@research.att.com]
>Sent: Monday, February 06, 2006 7:38 AM
>To: stuart.kerry@philips.com; stuart@ok-brit.com
>Cc: apetrick@widefi.com; hworstell@att.com
>Subject: New IEEE 802 Documentation numbering
>
>
>
>Dear Stuart,
>
>Please be advised that IEEE 802.11 is unable to meet the
>new IEEE 802 LMSC Policies and Procedures dated
>January 2006 with respect to the new document numbering
>system until we acquire new software that can accommodate
>that numbering scheme.
>
>Please inform the LMSC of our situation.
>
>Best regards,
>Harry Worstell
>
>
>Harry R. Worstell
>Sr. Technical Specialist
>Communications Technology Research
>AT&T Labs - Shannon Laboratory
>Vice Chair, IEEE 802.11 Working Group
>Room B233, Building 103
>180 Park Avenue
>P.O. Box 971
>Florham Park, NJ 07932-0971
>Phone: +1 (973) 236-6915
>Cell  +1(973) 727-5564
>Fax: +1 (973) 360-5873
>EMAIL: hworstell@research.att.com
>
>
>
>
>
>
>----------
>This email is sent from the 802 Executive Committee email reflector.
>This list is maintained by Listserv.
>
>----------
>This email is sent from the 802 Executive Committee email reflector.  This 
>list is maintained by Listserv.

----------
This email is sent from the 802 Executive Committee email reflector.  This list is maintained by Listserv.